Add Sony IMX471 camera sensor driver
Get series with b4
b4 am [email protected]Versions newest first · linked by author and title
- v6 Latest4 patches 13 repliesIn review
- v53 patches 13 repliesSuperseded
- v43 patches 17 repliesSuperseded
Earlier versions · 3
| Version | Posted | Patches | Replies | Status |
|---|---|---|---|---|
| v3 | 3 patches | 14 replies | Superseded | |
| v2 | 2 patches | 3 replies | Superseded | |
| v1 | 2 patches | 16 replies | Superseded |
Changes in v6 from the cover letter
1. Add the con_id "vana" for the power enable to the int3472_gpio_map table.
2. Drop unnecessary macros.
3. Name the registers.
Patches in v6 No applies recorded yet
| # | Subject and files | Size | Replies | Applied |
|---|---|---|---|---|
| 1/4 | media: ipu-bridge: Add DMI information of Lenovo X9 to the image upside-down listdrivers/ | +39 | 0 replies | |
| 2/4 | media: ipu-bridge: Add Sony IMX471 for Lenovo X1 Carbon G14drivers/ | +2 | 0 replies | |
| 3/4 | platform: int3472: discrete: con_id vana for Sony IMX471 as power enabledrivers/ | +18 | 13 replies | |
| 4/4 | media: i2c: imx471: Add Sony IMX471 image sensor driverMAINTAINERS drivers/ drivers/ +1 more | +974 | 0 replies |
Reviews trailers per patch
2 of 4 patches have a Reviewed-by or Acked-by.
| Patch | computman | Tarang Raval |
|---|---|---|
| 1/4 | ||
| 2/4 | ||
| 3/4 | R-b | |
| 4/4 | T-b | R-b |
Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.
Cover letter [PATCH v6 0/4] Add Sony IMX471 camera sensor driver
This patchset adds the Sony IMX471 camera sensor driver to the Linux kernel and resolves the IPU7 camera can't work issueon Lenovo X9 laptops [1].
The patchset contains two patches:
1. Add DMI information of Lenovo X9 to the image upside-down list
2. Add Sony IMX471 image sensor driver
The IMX471 driver can be found in the Intel ipu6-drivers repository [2]. To comply with the sensor driver implementation, the clean-up work includes:
1. Use CCI register helpers.
2. Enable and disable streams using enable_streams and disable_streams functions in struct v4l2_subdev_pad_ops. Invoke v4l2_subdev_s_stream_helper() to manage the streaming state.
3. Get rotation information from fwnode properties using v4l2_fwnode_device_parse().
4. Finalizes the initialization of the subdev, including allocation of the active state using v4l2_subdev_init_finalize().
5. Add the IMX471 driver to the Makefile and Kconfig file.
6. The mutex lock is managed by the V4l2 core.
7. Replace the supported link frequency with v4l2_link_freq_to_bitmap().
8. Drop unused codes.
[1] https://bugzilla.redhat.com/show_bug.cgi?id=2454119
[2] https://github.com/intel/ipu6-drivers/commits/master/drivers/media/i2c/imx471.c
Changes in v6:
1. Add the con_id "vana" for the power enable to the int3472_gpio_map table.
2. Drop unnecessary macros.
3. Name the registers.
Changes in v5:
1. Add a description for the DMI_BOARD_NAME in the ipu-bridge driver.
2. Check the numbers of MIPI lanes. The driver only support 4 lanes mode.
3. Fix many rumetime PM issues.
4. Drop pixel_rate control variable.
5. Drop unnecessary comments.
6. Name the registers.
7. Fix a leak in imx471_init_controls().
Changes in v4:
1. Add TBE20A0 (found on Lenovo X1 Carbon G14) to the supported sensors list.
2. Revert the sensor upside-down list to v1.
3. Decrease the max analog gain to 800 to mitigate the image flickering problem.
4. Return the error value when __v4l2_ctrl_modify_range() fails.
5. Fix indentation issue in Kconfig.
6. Fix the cci error value issue.
7. Drop unnecessary comments.
8. Drop unused link_freq control variable.
Changes in v3:
1. Naming the register addresses and set up the value with the correct value length.
2. Implement the .get_selection().
3. Drop "identified" field from struct imx471.
4. Drop "streaming" field from struct imx471 and use the __v4l2_ctrl_grab() instead.
5. Moreover, The naming for the register can be found in a seperated patch. If we agree with the patch, I will squash it into one patch.
Changes in v2:
1. Change the Bayer format setting according to the vertical and horizontal flip settings.
2. Replace the self-owned mutex with the v4l2 subdev state.
3. Rework the flip control.
4. Manage the regulators using devm_regulator_bulk_get|disable|enbale API
5. Invoke devm_v4l2_sensor_clk_get to get clock-frequency
Kate Hsuan (4):
media: ipu-bridge: Add DMI information of Lenovo X9 to the image
upside-down list
media: ipu-bridge: Add Sony IMX471 for Lenovo X1 Carbon G14
platform: int3472: discrete: con_id vana for Sony IMX471 as power
enable
media: i2c: imx471: Add Sony IMX471 image sensor driver
MAINTAINERS | 6 + drivers/media/i2c/Kconfig | 10 + drivers/media/i2c/Makefile | 1 + drivers/media/i2c/imx471.c | 957 ++++++++++++++++++ drivers/media/pci/intel/ipu-bridge.c | 41 + drivers/platform/x86/intel/int3472/discrete.c | 18 + 6 files changed, 1033 insertions(+) create mode 100644 drivers/media/i2c/imx471.c
Signature · 1 line
2.54.0