Skip to content

J722s: s2r: use ti,j7200-padconf

Richard Genoud (TI) linux-arm-kernel linux-devicetree lkml 2 versions – Applied

Status from this message: I have applied the following to branch ti-k3-dts-next on [1].

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v2 Latest3 patches 1 replyApplied
  2. v11 patch 2 repliesSuperseded

Changes in v2 from the cover letter

- Add ti,j7200-padconf at SoC level instead of board level.
- create k3-j722s-mcu.dtsi and k3-j722s-wakeup.dtsi for mcu/wakeup domain peripherals.

- Link to v1: https://lore.kernel.org/lkml/[email protected]/

Patches in v2 Applied

#Subject and filesSizeRepliesApplied
1/3arm64: dts: ti: k3-j722s: Use ti,j7200-padconf compatiblearch/arm64/boot/dts/ti/k3-j722s-main.dtsi+8 -00 replies
2/3arm64: dts: ti: k3-j722s: Add mcu domain peripherals specific to J722Sarch/arm64/boot/dts/ti/k3-j722s-main.dtsi arch/arm64/boot/dts/ti/k3-j722s-mcu.dtsi arch/arm64/boot/dts/ti/k3-j722s.dtsi+16 -100 replies
3/3arm64: dts: ti: k3-j722s: Add wakeup domain peripherals specific to J722Sarch/arm64/boot/dts/ti/k3-j722s-main.dtsi arch/arm64/boot/dts/ti/k3-j722s-wakeup.dtsi arch/arm64/boot/dts/ti/k3-j722s.dtsi+19 -140 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v2 yet.

Read the v2 thread

Cover letter [PATCH v2 0/3] J722s: s2r: use ti,j7200-padconf

The pinctrl contexts for j722s should be saved and restored during suspend-to-ram, just like it is done for j7200 and j784s4 SoCs.

The first patch adds the ti,j7200-padconf compatible, and the next 2 patches introduce k3-j722s-mcu.dtsi and k3-j722s-wakeup.dtsi, preventing using k3-j722s-main.dtsi for something else than main domain peripherals.

Changes from v1:
- Add ti,j7200-padconf at SoC level instead of board level.
- create k3-j722s-mcu.dtsi and k3-j722s-wakeup.dtsi for mcu/wakeup domain peripherals.

- Link to v1: https://lore.kernel.org/lkml/[email protected]/

Abhash Kumar Jha (1):
arm64: dts: ti: k3-j722s: Use ti,j7200-padconf compatible

Richard Genoud (TI) (2):
arm64: dts: ti: k3-j722s: Add mcu domain peripherals specific to J722S
arm64: dts: ti: k3-j722s: Add wakeup domain peripherals specific to

    J722S
 arch/arm64/boot/dts/ti/k3-j722s-main.dtsi   | 24 ++++-----------------
 arch/arm64/boot/dts/ti/k3-j722s-mcu.dtsi    | 15 +++++++++++++
 arch/arm64/boot/dts/ti/k3-j722s-wakeup.dtsi | 18 ++++++++++++++++
 arch/arm64/boot/dts/ti/k3-j722s.dtsi        |  2 ++
 4 files changed, 39 insertions(+), 20 deletions(-)
 create mode 100644 arch/arm64/boot/dts/ti/k3-j722s-mcu.dtsi
 create mode 100644 arch/arm64/boot/dts/ti/k3-j722s-wakeup.dtsi

base-commit: 254f49634ee16a731174d2ae34bc50bd5f45e731