Skip to content

ARM: dts: aspeed: santabarbara: Add system monitoring GPIOs

Fred Chen linux-arm-kernel linux-aspeed linux-devicetree lkml 2 versions – New

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v3 Latest5 patches 0 repliesNew
  2. v21 patch 1 replySuperseded

Changes in v3 from the cover letter

- Reword the system monitoring GPIOs commit message
- Disable power monitor nodes for ICs that now have multiple vendor sources
- Add GPIO line names for the JTAG CPU debug interface
- Add SGPIO line names for MCIO thermal trip monitoring and UFM read-complete
- Add a leak-cable-presence IO expander on the module boards
- Link to v2: https://lore.kernel.org/all/[email protected]/

Patches in v3 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/5ARM: dts: aspeed: santabarbara: Add system monitoring GPIOsarch/arm/boot/dts/aspeed/aspeed-bmc-facebook-santabarbara.dts+124 -10 replies
2/5ARM: dts: aspeed: santabarbara: Disable power monitor nodesarch/arm/boot/dts/aspeed/aspeed-bmc-facebook-santabarbara.dts+4 -00 replies
3/5ARM: dts: aspeed: santabarbara: Add JTAG GPIO line namesarch/arm/boot/dts/aspeed/aspeed-bmc-facebook-santabarbara.dts+5 -30 replies
4/5ARM: dts: aspeed: santabarbara: Add SGPIO line namesarch/arm/boot/dts/aspeed/aspeed-bmc-facebook-santabarbara.dts+5 -20 replies
5/5ARM: dts: aspeed: santabarbara: Add leak cable present IO expanderarch/arm/boot/dts/aspeed/aspeed-bmc-facebook-santabarbara.dts+54 -20 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v3 yet.

Read the v3 thread

Cover letter [PATCH v3 0/5] ARM: dts: aspeed: santabarbara: Add system monitoring GPIOs

Update Santabarbara Device Tree to include several GPIO expanders for NIC, Switch, and system monitoring.

v2 -> v3:
- Reword the system monitoring GPIOs commit message
- Disable power monitor nodes for ICs that now have multiple vendor sources
- Add GPIO line names for the JTAG CPU debug interface
- Add SGPIO line names for MCIO thermal trip monitoring and UFM read-complete
- Add a leak-cable-presence IO expander on the module boards
- Link to v2: https://lore.kernel.org/all/[email protected]/

v1 -> v2:
- Add system power fault alert and E1S GPIO expander interrupt
- Add switch board SKU IDs and power good monitoring
- Add NIC1-4 power good monitoring, reset control, and fault detection
- Update the commit message
- Link to v1: https://lore.kernel.org/all/[email protected]/

Fred Chen (5):
ARM: dts: aspeed: santabarbara: Add system monitoring GPIOs
ARM: dts: aspeed: santabarbara: Disable power monitor nodes
ARM: dts: aspeed: santabarbara: Add JTAG GPIO line names
ARM: dts: aspeed: santabarbara: Add SGPIO line names
ARM: dts: aspeed: santabarbara: Add leak cable present IO expander

 .../aspeed-bmc-facebook-santabarbara.dts      | 200 +++++++++++++++++-
 1 file changed, 192 insertions(+), 8 deletions(-)
Signature · 1 line
2.52.0