Skip to content

mm/swap, memcg: Introduce swap tiers for cgroup based swap control

Youngjun Park cgroups linux-mm lkml 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v9 Latest6 patches 14 repliesIn review

Patches in v9 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/6mm: swap: introduce swap tier infrastructureMAINTAINERS mm/Kconfig mm/Makefile +5 more+420 -40 replies
2/6mm: swap: associate swap devices with tiersDocumentation/mm/index.rst Documentation/mm/swap-tier.rst MAINTAINERS +5 more+257 -140 replies
3/6mm: memcontrol: add interface for swap tier selectionDocumentation/admin-guide/cgroup-v2.rst Documentation/mm/swap-tier.rst include/linux/memcontrol.h +4 more+255 -1011 replies
4/6mm: swap: filter swap allocation by memcg tier maskmm/swapfile.c+17 -70 replies
5/6selftests/mm: add a swap tier configuration testtools/testing/selftests/mm/.gitignore tools/testing/selftests/mm/Makefile tools/testing/selftests/mm/config +2 more+332 -00 replies
6/6selftests/cgroup: add a swap tier routing testtools/testing/selftests/cgroup/.gitignore tools/testing/selftests/cgroup/Makefile tools/testing/selftests/cgroup/config +1 more+505 -00 replies

Reviews trailers per patch

2 of 6 patches have a Reviewed-by or Acked-by.

PatchBaoquan He
1/6R-b
2/6R-b
3/6
4/6
5/6
6/6

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v9 thread

Cover letter [PATCH v9 0/6] mm/swap, memcg: Introduce swap tiers for cgroup based swap control

This is the v9 series of the swap tier patchset.

The main change in this version is the addition of selftests for the tier interfaces, requested by Nhat; see the changelog below for the other changes. I designed the test cases and wrote the selftests with some AI assistance.

For context, the bulk of the series is unchanged since v8, with great thanks to Shakeel Butt and Yosry for the reviews and discussions [1] that shaped it. The main change in v8 was the interface change to use memory.swap.tiers.max with '0' (disable) and 'max' (enable) values. This mechanism was suggested by Shakeel and Yosry.

This change allows for future extensions to control swap between tiers and aligns better with existing memcg interfaces. It is confined to patch #3's user-facing interface; internally, patch #3 still uses the existing mask processing method, which is implementation-efficient.

We also discussed tier extensions. Thanks to Yosry, Nhat and Shakeel for their valuable feedback.

Here is a brief summary of our tentative conclusions. Please correct me if anything is misrepresented (details in references):

* Zswap tiering [2]:
Tiering applies only to the vswap + zswap combo. Zswap itself will not be tiered, as the current architecture requires a physical device for zswap allocation.
* Vswap tiering [3]:
Vswap should be handled transparently to the user. Vswap itself will not be tiered. But, someday supported if there is strong and real usecase.
* Relationship with zswap.writeback [4]:
If zswap tiering is introduced, it could replace the zswap-only tier. However, since zswap cannot be tiered independently, it is still needed for non-vswap cases. Separately, the internal logic could potentially be integrated into the tiering logic.
* Tier demotion [5]:
A separate interface like memory.swap.tiers.demotion might be needed. For now, we only support 0/max to enable/disable tiers. In the future, we could introduce an "auto" mode to automatically scale the limit based on swapfile size and memory.swap.max, similar to the direction memory tiering is heading in.

I plan to apply the swap tier infrastructure and the first use case (cgroup-based swap control) first, and continue following up on the discussions above.

Overview
========

Swap Tiers group swap devices into performance classes (e.g. NVMe, HDD, Network) and allow per-memcg selection of which tiers to use. This mechanism was suggested by Chris Li.

Design Rationale
================

Swap tier selection is attached to memcg. A child cgroup may select a subset of the parent's allowed tiers.

This
- Preserves cgroup inheritance semantics (boundary at parent, refinement at child).
- Reuses memcg, which already groups processes and enforces hierarchical memory limits.
- Aligns with existing memcg swap controls (e.g. swap.max, zswap.writeback)
- Avoids introducing a parallel swap control hierarchy.

Placing tier control outside memcg (e.g., via BPF, syscalls, or madvise) would allow swap preference to diverge from the memcg hierarchy. Integrating it into memcg keeps the swap policy consistent with existing memory ownership semantics. There are also real use cases built around memcg.

In the future, this can be extended to other interfaces to cover additional use cases.

I believe a memcg-based swap control is a good starting point before such extensions.

Use Cases
=========

#1: Latency separation (our primary deployment scenario)
[ / ]
|
+-- latency-sensitive workload (fast tier)
+-- background workload (slow tier)

The parent defines the memory boundary.
Each workload selects a swap tier via memory.swap.tiers.max according to latency requirements.

This prevents latency-sensitive workloads from being swapped to slow devices used by background workloads.

#2: Per-VM swap selection (Chris Li's deployment scenario)
[ / ]
|
+-- [ Job on VM ] (tiers: zswap, SSD)
|
+-- [ VMM guest memory ] (tiers: SSD)

The parent (job) has access to both zswap and SSD tiers. The child (VMM guest memory) selects SSD as its swap tier via memory.swap.tiers.max. In this deployment, swap device selection happens at the child level from the parent's available set.

#3: Tier isolation for reduced contention (hypothetical)
[ / ] (tiers: A, B)
|
+-- workload X (tiers: A)
+-- workload Y (tiers: B)

Each child uses a different tier. Since swap paths are separated per tier, synchronization overhead between the two workloads is reduced.

Future extension (Follow up)
============================

#1: Intra-tier distribution policy:
Currently, swap devices with the same priority are allocated in a round-robin fashion. Per-tier policy files under /sys/kernel/mm/swap/tiers/ can control how devices within a tier are selected (e.g. round-robin, weighted).

#2: Inter-tier promotion and demotion:
Promotion and demotion apply between tiers, not within a single tier. The current interface defines only tier assignment; it does not yet define when or how pages move between tiers. Two triggering models are possible:

(a) User-triggered: userspace explicitly initiates migration between tiers (e.g. via a new interface or existing move_pages semantics).
(b) Kernel-triggered: the kernel moves pages between tiers at appropriate points such as reclaim or refault.

#3: Per-VMA, per-process swap and BPF:
Not just for memcg based swap, possible to extend Per-VMA or per-process swap. Or we can use it as BPF program.

#4: Zswap and vswap tiering:
Tiering applies to the vswap + zswap combination.

#5: Vswap on/off control:
Currently not supported. If a strong use case arises where vswap needs to be controlled by memcg, the tier interface could be used for it.

#6: Per-CPU swap allocation caching:
Per-si/per-tier per-CPU caching of allocations to reduce contention in the tier-filtered allocation path.

Experimentation
===============

Tested on our internal platform using NBD as a separate swap tier. Our first production's simple usecase.

Without tiers:
- No selective control over flash wear
- Cannot selectively assign NBD to specific applications

Cold launch improvement (preloaded vs. baseline):
- App A: 13.17s -> 4.18s (68%)
- App B: 5.60s -> 1.12s (80%)
- App C: 10.25s -> 2.00s (80%)

Performance impact with no tiers configured:
<1% regression in kernel build and vm-scalability benchmarks

Change log
===========

v9
- Added selftests (per Nhat's request):
- selftests/mm: swap tier configuration test for /sys/kernel/mm/swap/tiers.(#5 patch)
- selftests/cgroup: swap tier routing test for memory.swap.tiers.max. (#6 patch)
- Removed the redundant rcu_read_lock() around the memcg tier-mask tree walk; for_each_mem_cgroup_tree() already takes RCU internally and returns each memcg with a reference held. (#3 patch)
- Sashiko review: swap_sync_discard() now honors the memcg tier mask, so the discard fallback no longer drains clusters on disallowed tiers. Left as-is:
the cgroup tree walk under spinlock (bounded by cgroup.max.descendants, an admin-controlled limit, and triggered only by infrequent tier writes) and the pre-existing swap_avail_lock drop in swap_alloc_slow(). (#4 patch)
- Dropped patch #4's Reviewed-by tags (Nhat, Kairui, Baoquan): the swap_sync_discard() change above modifies that patch (the tier mask is now passed as a parameter into the alloc and discard paths), so the earlier tags no longer apply. Re-review would be welcome.
- v8 link: https://lore.kernel.org/linux-mm/[email protected]/

v8
- Changed the memcg interface to memory.swap.tiers.max.
Values are '0' (disable) and 'max' (enable). Default is 'max'.
- Addressed Sashiko's review: Update the mask value atomically at once and read the mask value while grabbing lock.
- Collected review tags from Kairui and Nhat.
- Rebase on recent mm-new
- v7 link: https://lore.kernel.org/linux-mm/[email protected]/

v7
- Collect Baoquan's review tag
- Baoquan's feedback on fixing improper comment
- Minor code adjustments per Baoquan's feedback.
- Rebase on recent mm-new
- v6 link: https://lore.kernel.org/linux-mm/[email protected]/

v6
- Sashiko AI review fixes
- Fix batch parsing error path to restore snapshot before exit
- Reject overlong tier names to prevent truncated duplicates
- Avoid restoring raw list_head via memcpy (stale pointer risk)
- Ensure early parse errors do not skip DEF_SWAP_PRIO validation
- Use (1U << TIER_DEFAULT_IDX) to avoid signed shift UB
- Defer tier mask inheritance to css_online() to close race window
- Add READ_ONCE()/WRITE_ONCE() for tier mask accesses
- Other fixes
- Fix build error reintroduced due to missing v5 change
- Fix WARNING in folio_tier_effective_mask by adding rcu_read_lock()
- default number of swap tier max (change to 32->31, for reserving last bit)
- commit message refinement.
- rebased on recently mm-new
- v5 link: https://lore.kernel.org/linux-mm/[email protected]/

v5
- Fixed build errors reported in v4
- rebased on up to date mm-new
- Minor cleanups
- Design docs with validation (by Shakeel Butt discussion)
- v4 link : https://lore.kernel.org/linux-mm/[email protected]/

v4
- Simplified control flow and indentation
- Added CONFIG option for MAX_SWAPTIER (default: 4)
- Added memory.swap.tiers.effective interface
- Reworked save/restore logic into snapshot/rollback model
- Removed tier priority modification support (deferred)
- Improved validation and fixed edge cases
- Rebased onto latest mm-new
- RFC v3 link: https://lore.kernel.org/linux-mm/[email protected]/

RFC v1 ~ v3
- Change the direction after discussion with Chris-Li
- apply some LPC feedback.
- RFC v2 - https://lore.kernel.org/linux-mm/[email protected]/
- RFC v1 - https://lore.kernel.org/linux-mm/[email protected]/

Earlier Approach (per cgroup swap priority)
- v1: https://lore.kernel.org/linux-mm/[email protected]/
- RFC: https://lore.kernel.org/linux-mm/aEvLjEInMQC7hEyh@yjaykim-PowerEdge-T330/T/#mbbb6a5e9e30843097e1f5f65fb98f31d582b973d

Reference
=========

[1] https://lore.kernel.org/linux-doc/[email protected]/
[2] https://lore.kernel.org/linux-mm/CAKEwX=Nz9SWcEVQGQjHN8P8OANJY4BG0w+iQOzoNOWuteoVjAg@mail.gmail.com/
[3] https://lore.kernel.org/cgroups/CAKEwX=O23a4iWBZoewKVb8QqODte6r3Xijckw3_oCJNoiO9M5A@mail.gmail.com/
[4] https://lore.kernel.org/linux-mm/CAO9r8zOg0OP1Ak1v7CRzSfQq0D8b4Dw+_T0Jui6YTM_KwQQNOA@mail.gmail.com/
[5] https://lore.kernel.org/linux-mm/CAO9r8zNi4-QC4sUi=xXWHt9WMeG39mbyoSf8kON9vLOZ=cbCmw@mail.gmail.com/

Youngjun Park (6):
mm: swap: introduce swap tier infrastructure
mm: swap: associate swap devices with tiers
mm: memcontrol: add interface for swap tier selection
mm: swap: filter swap allocation by memcg tier mask selftests/mm: add a swap tier configuration test selftests/cgroup: add a swap tier routing test

 Documentation/admin-guide/cgroup-v2.rst       |  20 +
 Documentation/mm/index.rst                    |   1 +
 Documentation/mm/swap-tier.rst                | 159 ++++++
 MAINTAINERS                                   |   3 +
 include/linux/memcontrol.h                    |   5 +
 include/linux/swap.h                          |   1 +
 mm/Kconfig                                    |  12 +
 mm/Makefile                                   |   2 +-
 mm/memcontrol.c                               |  67 +++
 mm/swap.h                                     |   4 +
 mm/swap_state.c                               |  75 +++
 mm/swap_tier.c                                | 477 +++++++++++++++++
 mm/swap_tier.h                                |  76 +++
 mm/swapfile.c                                 |  34 +-
 tools/testing/selftests/cgroup/.gitignore     |   1 +
 tools/testing/selftests/cgroup/Makefile       |   2 +
 tools/testing/selftests/cgroup/config         |   2 +
 .../selftests/cgroup/test_swap_tiers.c        | 500 ++++++++++++++++++
 tools/testing/selftests/mm/.gitignore         |   1 +
 tools/testing/selftests/mm/Makefile           |   1 +
 tools/testing/selftests/mm/config             |   2 +
 tools/testing/selftests/mm/run_vmtests.sh     |   5 +
 tools/testing/selftests/mm/swap_tier.c        | 323 +++++++++++
 23 files changed, 1762 insertions(+), 11 deletions(-)
 create mode 100644 Documentation/mm/swap-tier.rst
 create mode 100644 mm/swap_tier.c
 create mode 100644 mm/swap_tier.h
 create mode 100644 tools/testing/selftests/cgroup/test_swap_tiers.c
 create mode 100644 tools/testing/selftests/mm/swap_tier.c

base-commit: cdad4d4e4fc2e5acb9a8b2cac9af6ce87c92656f

Signature · 1 line
2.48.1