Skip to content

memcg: bail out reclaim when memcg is dying

Jiayuan Chen cgroups lkml 3 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v3 Latest4 patches 1 replyIn review 3 of 4 applied
  2. v24 patches 1 replySuperseded
  3. v13 patches 2 repliesSuperseded

Changes in v3 from the cover letter

- Add Acked-by: Johannes Weiner <[email protected]>
- Add comment suggested by Johannes
https://lore.kernel.org/linux-mm/[email protected]/

Patches in v3 3 of 4 applied

#Subject and filesSizeRepliesApplied
1/4memcg: bail out memory.high when memcg is dyingmm/memcontrol.c+4 -00 replies
2/4memcg: bail out memory.max when memcg is dyingmm/memcontrol.c+4 -00 repliesApplied
3/4memcg: bail out proactive reclaim when memcg is dyingmm/vmscan.c+4 -01 replyApplied
4/4memcg-v1: bail out reclaim when memcg is dyingmm/memcontrol-v1.c+8 -00 repliesApplied

Reviews trailers per patch

All 4 patches have a Reviewed-by or Acked-by.

PatchJohannes Weiner
1/4A-b
2/4A-b
3/4A-b
4/4A-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v3 thread

Cover letter [PATCH v3 0/4] memcg: bail out reclaim when memcg is dying

Hi,

This series mitigates a system-wide stall we hit when a cgroup is removed while one of its memory control files is doing synchronous reclaim.

v2 -> v3:
- Add Acked-by: Johannes Weiner <[email protected]>
- Add comment suggested by Johannes
https://lore.kernel.org/linux-mm/[email protected]/

v1 -> v2:
- Return -EAGAIN from memory.reclaim when the memcg is dying.
- Add the same bailout to the legacy v1 reclaim loops.
https://lore.kernel.org/linux-mm/[email protected]/

Problem Description
===================

Writing to memory.high, memory.max or memory.reclaim runs reclaim synchronously in the writer's context, looping until the usage drops below the target (or, for memory.reclaim, until the requested amount has been reclaimed). On a large cgroup this can take a long time. The latency is especially bad when reclaim has to perform swap I/O, where it is bound by the swap device write bandwidth, and under thrashing it is effectively unbounded - each round reclaims a few pages that the workload immediately faults back in, so the loop keeps making "progress" and never converges.

The legacy (v1) reclaim loops in memory.limit_in_bytes, memory.memsw.limit_in_bytes and memory.force_empty share the same pattern.

These writes go through cgroup_file_write(), which does not take cgroup_mutex and does not pin the css. Instead, kernfs guarantees the node (and thus the css) stays alive for the duration of the operation by holding an active reference. So while the reclaim loop runs, the active reference on the file is held.

If another task removes the same cgroup in parallel, cgroup_rmdir() takes cgroup_mutex and then blocks in kernfs_drain() waiting for that active reference to drain. Because cgroup_mutex is held throughout the wait, every other task that needs it piles up behind the remover - in our case the whole machine ground to a halt, with hung_task reports for the remover and for unrelated tasks merely reading /proc/<pid>/cgroup:

INFO: task cgdelete:366634 blocked for more than 159 seconds.
      Not tainted 6.6.102+ #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
Call Trace:
 <TASK>
 __schedule+0x3da/0x1650
 schedule+0x58/0x100
 kernfs_drain+0xe6/0x150
 __kernfs_remove.part.0+0xd0/0x200
 kernfs_remove_by_name_ns+0x75/0xd0
 cgroup_addrm_files+0x325/0x410
 css_clear_dir+0x50/0xf0
 cgroup_destroy_locked+0xdf/0x1e0
 cgroup_rmdir+0x2d/0xd0
 kernfs_iop_rmdir+0x53/0x90
 vfs_rmdir+0x98/0x240
 do_rmdir+0x172/0x1b0
 __x64_sys_rmdir+0x42/0x70
 x64_sys_call+0xeb0/0x2210
 do_syscall_64+0x56/0x90
 entry_SYSCALL_64_after_hwframe+0x78/0xe2


INFO: task systemd-journal:2352 blocked for more than 182 seconds.
      Not tainted 6.6.102+ #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
Call Trace:
 <TASK>
 __schedule+0x3da/0x1650
 schedule+0x58/0x100
 schedule_preempt_disabled+0xe/0x20
 __mutex_lock.constprop.0+0x3bb/0x640
 __mutex_lock_slowpath+0x13/0x20
 mutex_lock+0x3c/0x50
 proc_cgroup_show+0x4d/0x380
 proc_single_show+0x53/0xe0
 seq_read_iter+0x12f/0x4b0
 seq_read+0xcd/0x110
 vfs_read+0xb1/0x360
 ? __seccomp_filter+0x368/0x590
 ksys_read+0x73/0x100
 __x64_sys_read+0x19/0x30
 x64_sys_call+0x18d3/0x2210
 do_syscall_64+0x56/0x90
 entry_SYSCALL_64_after_hwframe+0x78/0xe2

The system recovers only once the reclaim finally finishes and releases the active reference. The reclaim itself is pointless here: the cgroup is being torn down and its remaining pages will be reparented to the parent anyway.

Even though we check signal_pending(current) in the reclaim loop, the typical symptom is that cat /proc/<pid>/cgroup gets stuck.
By the time someone looks for which task is actually stuck in reclaim, the hung task timeout has already been hit. This makes the problem particularly nasty to debug from a hung-task report alone, because the blocked tasks shown are often the victims, not the reclaim writer itself.

Our Mitigation
==============

cgroup destruction sets CSS_DYING in kill_css_sync() *before* css_clear_dir() triggers the kernfs_drain() that blocks the remover. The in-flight reclaim loop is therefore guaranteed to observe it before starting another reclaim iteration. This series checks memcg_is_dying() in the v2 reclaim loops (memory.high, memory.max and proactive reclaim) and the v1 reclaim loops (memory.limit_in_bytes, memory.memsw.limit_in_bytes and memory.force_empty), and bails out early, so the writer drops the active reference promptly and the remover can make progress.

Unlike the no-progress guard (MAX_RECLAIM_RETRIES), which only fires when reclaim makes zero progress, the dying check also covers the slow swap I/O and thrashing cases, where reclaim keeps succeeding a little and the loop would otherwise never converge.

For memory.reclaim, bailing out because the memcg is dying means the requested reclaim amount was not satisfied, so the write returns -EAGAIN.

This is orthogonal to commit c8e6002bd611 ("memcg: introduce non-blocking limit setting option"): O_NONBLOCK lets a caller avoid the synchronous reclaim up front, while this series handles the case where reclaim is already running when the cgroup starts being removed.

Jiayuan Chen (4):
memcg: bail out memory.high when memcg is dying
memcg: bail out memory.max when memcg is dying
memcg: bail out proactive reclaim when memcg is dying
memcg-v1: bail out reclaim when memcg is dying

 mm/memcontrol-v1.c | 8 ++++++++
 mm/memcontrol.c    | 8 ++++++++
 mm/vmscan.c        | 4 ++++
 3 files changed, 20 insertions(+)
Signature · 1 line
2.43.0