Skip to content

wifi: mt76: mt7996: fix runtime txpower limits

Yanghan Ye linux-mediatek linux-wireless 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest2 patches 0 repliesNew

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2wifi: mt76: mt7996: refresh power limits on txpower changesmt7996/main.c+60 -20 replies
2/2wifi: mt76: mt7996: enable firmware txpower limit controlseeprom.c mt7996/init.c mt7996/main.c +3 more+411 -200 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH v1 0/2] wifi: mt76: mt7996: fix runtime txpower limits

Refresh the mt7996 firmware power limit table when mac80211 reports txpower changes, and enable the firmware TXPOWER SKU/backoff controls needed for uploaded tables to take effect.

Tested on an XR1710G/MT7996 device with 6 GHz AP mode. The reported txpower follows iw dev ... set txpower fixed 1000/2000, and measured signal level changes accordingly.

Yanghan Ye (2):
wifi: mt76: mt7996: refresh power limits on txpower changes
wifi: mt76: mt7996: enable firmware txpower limit controls

 eeprom.c        |   9 ++
 mt7996/init.c   |  16 ++-
 mt7996/main.c   |  72 +++++++++-
 mt7996/mcu.c    | 365 +++++++++++++++++++++++++++++++++++++++++++++---
 mt7996/mcu.h    |  25 ++++
 mt7996/mt7996.h |   6 +
 6 files changed, 471 insertions(+), 22 deletions(-)

base-commit: 2dd6e4c8892f59b7943ee163afd6ced881bfb31b

Signature · 1 line
2.43.0