Skip to content

md/raid5: scalability and rebuild-path improvements

Hiroshi Nishida linux-raid lkml sashiko-reviews 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest8 patches 8 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/8md: change chunk_sectors and stripe cache counts to unsigned intdrivers/md/md.h drivers/md/raid5.c drivers/md/raid5.h+13 -131 reply
2/8md/raid5: raise stripe cache limit from 32768 to 262144drivers/md/raid5.c drivers/md/raid5.h+9 -30 replies
3/8md: widen badblock sectors param from int to sector_tdrivers/md/md.c drivers/md/md.h+5 -50 replies
4/8md/raid5: raise NR_STRIPE_HASH_LOCKS from 8 to 32drivers/md/raid5.h+7 -50 replies
5/8md/raid5: submit a window of stripes during resync/recoverydrivers/md/raid5.c drivers/md/raid5.h+35 -131 reply
6/8md/raid5: allocate worker groups per NUMA nodedrivers/md/raid5.c+26 -131 reply
7/8md/raid5: raise MAX_STRIPE_BATCH from 8 to 32drivers/md/raid5.c drivers/md/raid5.h+3 -21 reply
8/8md/raid5: reserve stripe cache for user I/O during rebuilddrivers/md/raid5.c drivers/md/raid5.h+22 -01 reply

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/8] md/raid5: scalability and rebuild-path improvements

This series collects small, individually low-risk md/raid5 changes for large, many-core, many-disk arrays. Their common theme is reducing per-stripe and stripe-cache contention, so the benefit appears mainly when the raid5 stripe-handling worker threads are in use (group_thread_cnt > 0); at the default group_thread_cnt = 0 (a single handling thread) the series is essentially neutral.

- patches 1-3 remove signed arithmetic from a hot-path divisor, lift an arbitrary stripe-cache size cap, and widen a badblock length argument that currently truncates large ranges;
- patch 4 raises NR_STRIPE_HASH_LOCKS (8 -> 32) to spread stripe-hash contention on high core-count systems;
- patches 5 and 8 reduce per-stripe overhead in the resync/recovery path and bound the share of the stripe cache a rebuild may hold while user I/O is competing;
- patch 6 allocates each worker group's array on its own NUMA node;
- patch 7 raises MAX_STRIPE_BATCH (8 -> 32).

Measured effect, treatment vs baseline, % change in mean IOPS (N=3), swept over group_thread_cnt (RAID6 4+2, 22-core host, ramdisk members):

  workload                       gtc=0   gtc=2   gtc=4   gtc=8
  random 4K write (RMW)          +4.2%   +8.1%  +17.4%   +6.5%
  DB mixed 75/25 8K              +0.4%   +4.2%  +10.3%   +4.7%
  high-concurrency 70/30 4K      +3.9%   +1.2%  +10.0%   +0.2%
  OLTP 70/30 16K                 -0.3%   +4.7%  +10.1%   +9.3%
  partial-stripe write 8K        +1.1%   +4.8%  +11.2%  +14.2%

At the default single handling thread (group_thread_cnt = 0) the series is neutral (no regression). As worker threads are added the gain grows, peaking broadly around group_thread_cnt = 4 at roughly +10-17% across the whole mix; at gtc = 8 the write-heavy workloads keep gaining while the read-heavy high-concurrency case has saturated. (Per-run cv was <1% except the random-write test, ~5-9%, from a cold first run.)

These numbers are on a ramdisk, which removes device latency and so overstates the CPU-side contention effect relative to a real device; they show the direction and the group_thread_cnt dependence, not an absolute speedup. The stripe-hash/batch patches (4, 7) and the cache cap
(2) drive this; patch 6 only matters on multi-socket systems (not exercised above) and patches 5/8 act on the resync/recovery path rather than this steady-state workload.

Reproduction (stock mdadm + fio):
mdadm --create /dev/md0 --level=6 --raid-devices=6 --chunk=512 \
--assume-clean <6 members>
echo 16384 > /sys/block/md0/md/stripe_cache_size
echo N > /sys/block/md0/md/group_thread_cnt # N = 0,2,4,8

  fio --filename=/dev/md0 --direct=1 --ioengine=libaio --group_reporting \
      --time_based --runtime=15 --name=w <per-workload opts>:
    random write   : --rw=randwrite              --bs=4k  --numjobs=4  --iodepth=32
    DB mixed       : --rw=randrw --rwmixread=75  --bs=8k  --numjobs=8  --iodepth=16
    high-concur.   : --rw=randrw --rwmixread=70  --bs=4k  --numjobs=16 --iodepth=8
    OLTP           : --rw=randrw --rwmixread=70  --bs=16k --numjobs=6  --iodepth=16
    partial-stripe : --rw=randwrite              --bs=8k  --numjobs=4  --iodepth=32

Each patch stands on its own; I am happy to drop or defer any that is not justified on its own merit.

Functional testing on RAID5 and RAID6: create, fail a member, rebuild onto a spare / re-add, full data read-back verified, and scrub ("check") reporting mismatch_cnt == 0. The series was also exercised with KASAN and lockdep enabled -- including heavy group_thread_cnt churn on a multi-node setup to stress the per-NUMA-node worker allocation and the raid5_quiesce hash-lock-all path -- with no reports.

Hiroshi Nishida (8):
md: change chunk_sectors and stripe cache counts to unsigned int md/raid5: raise stripe cache limit from 32768 to 262144
md: widen badblock sectors param from int to sector_t md/raid5: raise NR_STRIPE_HASH_LOCKS from 8 to 32 md/raid5: submit a window of stripes during resync/recovery md/raid5: allocate worker groups per NUMA node md/raid5: raise MAX_STRIPE_BATCH from 8 to 32 md/raid5: reserve stripe cache for user I/O during rebuild

 drivers/md/md.c    |   4 +-
 drivers/md/md.h    |  10 ++--
 drivers/md/raid5.c | 129 ++++++++++++++++++++++++++++++++-------------
 drivers/md/raid5.h |  33 ++++++++----
 4 files changed, 121 insertions(+), 55 deletions(-)

base-commit: 55b77337bdd088c77461588e5ec094421b89911b

Signature · 1 line
2.43.0