Skip to content

It fixes a SEGV in eapol_rx_packets at receipt of EAPOL M1 msg at legacy roaming following a failed FT-handover due to a preceding ft_auth-/ft_reassoc-timeout. The issue only arises when using mwifiex / NXP 88W9098 driver for the client's WLAN module. We have seen the issue with SIEMENS SCALANCE W700 AX APs, but it may also occur with other AP brands supporting FT-handover.

Dierk Modrow iwd 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v2 Latest2 patches 0 repliesNew

Patches in v2 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2It fixes a SEGV in eapol_rx_packets at receipt of EAPOL M1 msg at legacy roaming following a failed FT-handover due to a preceding ft_auth-/ft_reassoc-timeout. The issue only arises when using mwifiex / NXP 88W9098 driver for the client's WLAN module. We have seen the issue with SIEMENS SCALANCE W700 AX APs, but it may also occur with other AP brands supporting FT-handover.src/eapol.c+4 -00 replies
2/2It fixes SEGV in station_roam_scan_notify when performing repeated roam scans at legacy roaming after a failed FT-handover due to a ft_auth-/ft_reassoc-timeout. The issue occurs with all WLAN drivers. We have seen the issue with SIEMENS SCALANCE W700 AX APs, but it may also occur with other AP brands supporting FT-handover.src/station.c+6 -60 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v2 yet.

Read the v2 thread