Skip to content

Add Toradex DSI to LVDS adapter with the 10.1" V2 display

Leonardo Costa imx linux-arm-kernel linux-devicetree lkml 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest1 patch 0 repliesNew

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/1arm64: dts: freescale: imx8mm-verdin: Add Toradex DSI to LVDS adapter with the 10.1" V2 displayarch/arm64/boot/dts/freescale/Makefile arch/arm64/boot/dts/freescale/imx8mm-verdin-dsi-to-lvds-v2-panel-cap-touch-10inch.dtso+137 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/1] Add Toradex DSI to LVDS adapter with the 10.1" V2 display

From: Leonardo Costa <[email protected]>

This patch adds the device tree overlay for the Toradex Capacitive Touch Display 10.1" LVDS V2 through the DSI to LVDS bridge on the Verdin iMX8M Mini.

This change depends on two other patch series, and should be applied after them:

- https://lore.kernel.org/linux-arm-kernel/[email protected]/T/#t

Adds the Toradex Capacitive Touch Display 10.1" LVDS V2 overlays for the Verdin AM62. This series is required because it adds the panel bindings for the display. It is currently in linux-next.

- https://lore.kernel.org/all/[email protected]/T/#t

Adds the other device tree overlays for the Verdin iMX8M Mini.

Leonardo Costa (1):
arm64: dts: freescale: imx8mm-verdin: Add Toradex DSI to LVDS adapter
with the 10.1" V2 display

 arch/arm64/boot/dts/freescale/Makefile        |   4 +
 ...dsi-to-lvds-v2-panel-cap-touch-10inch.dtso | 133 ++++++++++++++++++
 2 files changed, 137 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-verdin-dsi-to-lvds-v2-panel-cap-touch-10inch.dtso