Skip to content

arm: snapdragon: Add snagboot support for Lemans-EVK

Balaji Selvanathan u-boot 6 versions – In review

Get series with b4
b4 am [email protected] change-id 20260731-snagboot-4e9f66f0252d

Versions newest first

  1. v10 Latest7 patches 2 repliesIn review
  2. v98 patches 16 repliesSuperseded
  3. v88 patches 0 repliesSuperseded
Earlier versions · 3
VersionPostedPatchesRepliesStatus
v78 patches4 repliesSuperseded
v68 patches0 repliesSuperseded
v58 patches0 repliesSuperseded

Changes in v10 from the cover letter

- Drop the CONFIG_ARM_SMCCC guards patch, SYSRESET_PSCI is already
off in snagboot mode so the PSCI functions are not built
- Depend on ENV_IS_DEFAULT instead of selecting ENV_IS_NOWHERE
- Drop depends on !ENV_IS_IN_SCSI, !PSCI_RESET, !SAVE_PREV_BL_INITRAMFS_START_ADDR, COUNTER_FREQUENCY != 0 and
TEXT_BASE != 0
- Replace the cmd-db.c change with a patch that lets QCOM_RPMH build
without QCOM_COMMAND_DB, and disable QCOM_COMMAND_DB in the snagboot
config fragment
- Fix the title underline in the snagboot doc
- Shorten the cover letter and link to the snagrecover IQ9075 docs
- Link to v9: https://lore.kernel.org/r/[email protected]

Patches in v10 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/7arm: snapdragon: Make SYSRESET_PSCI optionalarch/arm/Kconfig+1 -10 replies
2/7arm: snapdragon: Disable MMU early before U-Boot reset vectorarch/arm/mach-snapdragon/include/mach/boot0.h arch/arm/mach-snapdragon/include/mach/snagboot_boot0.h+29 -00 replies
3/7arm: snapdragon: Add CONFIG_QCOM_SNAGBOOT_MODE optionarch/arm/mach-snapdragon/Kconfig+14 -00 replies
4/7soc: qcom: Allow RPMh to be built without Command DBdrivers/soc/qcom/Kconfig include/soc/qcom/cmd-db.h+7 -10 replies
5/7arch: arm: dts: remove Lemans EVK override DTSarch/arm/dts/lemans-evk-u-boot.dtsi+0 -190 replies
6/7configs: add qcom_lemans_snagboot_defconfig for Lemans-EVKconfigs/qcom-snagboot.config configs/qcom_lemans_snagboot_defconfig+33 -00 replies
7/7doc: qualcomm: Add snagboot mode documentationdoc/board/qualcomm/index.rst doc/board/qualcomm/snagboot.rst+85 -00 replies

Reviews trailers per patch

1 of 7 patches has a Reviewed-by or Acked-by.

PatchVaradarajan Narayanan
1/7R-b
2/7
3/7
4/7
5/7
6/7
7/7

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v10 thread

Cover letter [PATCH v10 0/7] arm: snapdragon: Add snagboot support for Lemans-EVK

This series adds support for running U-Boot in snagboot mode on Qualcomm Snapdragon platforms, targeting the Lemans-EVK board.

Snagboot (https://github.com/bootlin/snagboot) is a recovery and reflashing tool that works through the SoC boot ROM. On Qualcomm SoCs, snagrecover loads XBL over Sahara in EDL mode to initialise DDR and then loads U-Boot into DDR, where it enters fastboot so that snagflash can write the images. Support for the Lemans-EVK (IQ9075) is in the snagboot tree, see the Qualcomm IQ9075 sections of
https://github.com/bootlin/snagboot/blob/main/docs/snagrecover.md
See also the doc/board/qualcomm/snagboot.rst added in patch 7 for usage and build steps.

XBL leaves the MMU enabled and does not set up PSCI firmware or Command DB in this flow, so the series adds a QCOM_SNAGBOOT_MODE option, an early MMU disable, and a defconfig and config fragment for Lemans-EVK.

Tested on Lemans-EVK board.

---
Changes in v10:
- Drop the CONFIG_ARM_SMCCC guards patch, SYSRESET_PSCI is already
off in snagboot mode so the PSCI functions are not built
- Depend on ENV_IS_DEFAULT instead of selecting ENV_IS_NOWHERE
- Drop depends on !ENV_IS_IN_SCSI, !PSCI_RESET, !SAVE_PREV_BL_INITRAMFS_START_ADDR, COUNTER_FREQUENCY != 0 and
TEXT_BASE != 0
- Replace the cmd-db.c change with a patch that lets QCOM_RPMH build
without QCOM_COMMAND_DB, and disable QCOM_COMMAND_DB in the snagboot
config fragment
- Fix the title underline in the snagboot doc
- Shorten the cover letter and link to the snagrecover IQ9075 docs
- Link to v9: https://lore.kernel.org/r/[email protected]

Changes in v9:
- Drop the assumption that snagboot mode needs IOMMU disabled:
QCOM_SNAGBOOT_MODE no longer depends on !IOMMU and
qcom-snagboot.config no longer sets CONFIG_IOMMU=n
- Link to v8: https://lore.kernel.org/r/[email protected]

Changes in v8:
- Make changes in documentation
- Link to v7: https://lore.kernel.org/r/[email protected]

Changes in v7:
- Rebased on top of latest main branch
- Link to v6: https://lore.kernel.org/r/[email protected]

Changes in v6:
- Forget to send summary in v5 cover letter, no other changes in v6
- Link to v5: https://marc.info/?l=u-boot&m=178577208345353&w=2

Changes in v5:
- Make QCOM_BOOT0_SNAGBOOT_MODE as hidden config dependent on
QCOM_SNAGBOOT_MODE
- Disable C (Dcache) bit of SCTLR_EL3 register during MMU disable
- Remove now unused QCOM_COMMAND_DB_OPTIONAL Kconfig definition
- Disable unnecessar I2C configs (for Snagboot) in Qcom Snagboot
config fragment
- Add build steps for compiling U-Boot for Snagboot mode in
Qcom Snagboot doc
- Link to v4: https://lore.kernel.org/u-boot/[email protected]/

Changes in v4:
- Renamed QCOM_SNAGBOOT_SUPPORT to QCOM_SNAGBOOT_MODE
- Make SYSRESET_PSCI dependent on QCOM_SNAGBOOT_MODE
- Place Snagboot related configs in seperate config fragment
called configs/qcom-snagboot.config
- Include above config fragment in
configs/qcom_lemans_snagboot_defconfig
- Removed Lemans EVK override dtsi: arch/arm/dts/lemans-evk-u-boot.dtsi
- Removed QCOM_COMMAND_DB_OPTIONAL as now we use
CONFIG_QCOM_SNAGBOOT_MODE
- Added documentation on U-Boot for Snagboot
- Link to v3: https://lore.kernel.org/u-boot/[email protected]/

Changes in v3:
- Brought the MMU disable logic under CONFIG_QCOM_SNAGBOOT_SUPPORT
ifdef condition
- Moved the MMU disable codes to a new seperate file
- Used "if (IS_ENABLED(CONFIG_QCOM_COMMAND_DB_OPTIONAL))" instead
of #ifdef
- Removed enabling QCOM_COMMAND_DB_OPTIONAL, ENABLE_ARM_SOC_BOOT0_HOOK
and SKIP_RELOCATE as they are now automatically enabled by
QCOM_SNAGBOOT_SUPPORT selection
- Removed updating MAINTAINERS as the defconfig file is picked up by
the "N: qcom" line
- Link to v2: https://lore.kernel.org/u-boot/[email protected]/

Changes in v2:
- Changed SYSRESET_PSCI from 'select' to 'imply'
- Guard show_psci_version() and qcom_psci_fixup() with CONFIG_ARM_SMCCC
- Disables the MMU and invalidates TLBs at the earliest entry point
- Add qcom_lemans_snagboot_defconfig for Lemans-EVK
- Link to v1: https://lore.kernel.org/u-boot/[email protected]/

---
Balaji Selvanathan (7):
arm: snapdragon: Make SYSRESET_PSCI optional
arm: snapdragon: Disable MMU early before U-Boot reset vector
arm: snapdragon: Add CONFIG_QCOM_SNAGBOOT_MODE option
soc: qcom: Allow RPMh to be built without Command DB
arch: arm: dts: remove Lemans EVK override DTS
configs: add qcom_lemans_snagboot_defconfig for Lemans-EVK
doc: qualcomm: Add snagboot mode documentation

 arch/arm/Kconfig                                   |  2 +-
 arch/arm/dts/lemans-evk-u-boot.dtsi                | 19 -----
 arch/arm/mach-snapdragon/Kconfig                   | 14 ++++
 arch/arm/mach-snapdragon/include/mach/boot0.h      |  2 +
 .../mach-snapdragon/include/mach/snagboot_boot0.h  | 27 +++++++
 configs/qcom-snagboot.config                       | 25 +++++++
 configs/qcom_lemans_snagboot_defconfig             |  8 +++
 doc/board/qualcomm/index.rst                       |  1 +
 doc/board/qualcomm/snagboot.rst                    | 84 ++++++++++++++++++++++
 drivers/soc/qcom/Kconfig                           |  1 -
 include/soc/qcom/cmd-db.h                          |  7 ++
 11 files changed, 169 insertions(+), 21 deletions(-)

---
base-commit: 3401e006432abcbf7d73d7210f10df157f990ed3
change-id: 20260731-snagboot-4e9f66f0252d

Best regards,

Signature · 1 line
Balaji Selvanathan <[email protected]>