Skip to content

Cleanup i.MX95 based Toradex boards

Stefan Eichenberger u-boot 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest2 patches 1 replyIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2configs: {aquila, verdin, toradex-smarc}-imx95: remove CONFIG_SPIconfigs/aquila-imx95_defconfig configs/toradex-smarc-imx95_defconfig configs/verdin-imx95_defconfig+0 -30 replies
2/2imx: verdin-imx95: remove unused WDOG_BASE_ADDRinclude/configs/verdin-imx95.h+0 -20 replies

Reviews trailers per patch

None of the 2 patches has a Reviewed-by or Acked-by of their own; the series has one for all of them.

PatchFrancesco Dolcini
SeriesA-b
1/2
2/2

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [PATCH v1 0/2] Cleanup i.MX95 based Toradex boards

This series removes two leftovers from the Toradex i.MX95 board support.

The first patch drops CONFIG_SPI from the aquila-imx95, verdin-imx95 and toradex-smarc-imx95 defconfigs. It has been set since the initial board support, but none of the boards selects an SPI controller or slave driver, so SPI is not usable in U-Boot on them anyway.

The second patch removes the WDOG_BASE_ADDR definition from verdin-imx95.h. The ULP watchdog driver takes its base address from the devicetree now, and the macro it expanded to no longer exists, so the definition is dangling.

Neither patch changes behaviour, they only drop unused configuration. All three boards were build tested.

Stefan Eichenberger (2):
configs: {aquila, verdin, toradex-smarc}-imx95: remove CONFIG_SPI
imx: verdin-imx95: remove unused WDOG_BASE_ADDR

 configs/aquila-imx95_defconfig        | 1 -
 configs/toradex-smarc-imx95_defconfig | 1 -
 configs/verdin-imx95_defconfig        | 1 -
 include/configs/verdin-imx95.h        | 2 --
 4 files changed, 5 deletions(-)
Signature · 1 line
2.55.0