Skip to content

ALSA: usb-audio: support Roland Capture sample rates

Jonathan Seth Mainguy linux-sound lkml 1 version Applied

Status from this message: Applied to for-next branch. Thanks.

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest4 patches 1 replyApplied

Patches in v1 Applied

#Subject and filesSizeRepliesApplied
1/4ALSA: usb-audio: add Roland OCTA-CAPTURE multirate supportsound/usb/quirks-table.h+100 -40 replies
2/4ALSA: usb-audio: expose OCTA-CAPTURE control MIDI cablessound/usb/quirks-table.h+2 -20 replies
3/4ALSA: usb-audio: add Roland QUAD-CAPTURE multirate supportsound/usb/quirks-table.h+97 -10 replies
4/4ALSA: usb-audio: set Roland Capture rate during stream preparationsound/usb/quirks.c+74 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/4] ALSA: usb-audio: support Roland Capture sample rates

The fixed quirks for these devices currently describe 44.1 kHz:

0582:0120 Roland OCTA-CAPTURE
0582:012f Roland QUAD-CAPTURE

Add their 48, 96 and 192 kHz alternate settings. The OCTA-CAPTURE's existing S32_LE format description causes the white-noise playback reported by Niklas Aldervall and other users. Change it to the packed S24_3LE format used by the device.

Expose the OCTA-CAPTURE control MIDI cables and synchronize the hardware clock with the selected endpoint rate during stream preparation.

Tested on physical OCTA-CAPTURE and QUAD-CAPTURE units. Rate changes followed by full-duplex streaming succeeded at 44.1, 48, 96 and 192 kHz on both models. External digital clocking on the OCTA-CAPTURE was tested at all supported
rates: 44.1, 48 and 96 kHz. The OCTA-CAPTURE disables its digital input and output at 192 kHz, so external clocking is unavailable at that rate.

Jonathan Seth Mainguy (4):
ALSA: usb-audio: add Roland OCTA-CAPTURE multirate support
ALSA: usb-audio: expose OCTA-CAPTURE control MIDI cables
ALSA: usb-audio: add Roland QUAD-CAPTURE multirate support
ALSA: usb-audio: set Roland Capture rate during stream preparation

 sound/usb/quirks-table.h | 206 +++++++++++++++++++++++++++++++++++++--
 sound/usb/quirks.c       |  74 ++++++++++++++
 2 files changed, 273 insertions(+), 7 deletions(-)

base-commit: 548e7bcd0c5460ddcbca9600cea603ebeebf4da7

Signature · 1 line
2.55.0