Skip to content

regulator: mp886x: add MP8864 support

Jisheng Zhang linux-devicetree lkml 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest3 patches 2 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/3regulator: mp886x: fix vsel_maskdrivers/regulator/mp886x.c+1 -10 replies
2/3regulator: dt-bindings: mp886x: support mp8864Documentation/devicetree/bindings/regulator/mps,mp886x.yaml+14 -21 reply
3/3regulator: mp886x: add MP8864 supportdrivers/regulator/Kconfig drivers/regulator/mp886x.c+21 -20 replies

Reviews trailers per patch

1 of 3 patches has a Reviewed-by or Acked-by.

PatchConor Dooley
1/3
2/3A-b
3/3

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [PATCH 0/3] regulator: mp886x: add MP8864 support

The MP8864 is a 4 A, 21 V synchronous step-down converter. Its register layout and voltage transition handling are compatible with the MP8867, but its selectable switching frequencies are 600 kHz, 850 kHz, 1.1 MHz and 1.6 MHz.

Add the compatible and chip-specific switching-frequency table.

patch1 fixes the vsel_mask
patch2 document the mp8864 dt-binding
patch3 add the mp8864 support to the driver

Jisheng Zhang (3):
regulator: mp886x: fix vsel_mask
regulator: dt-bindings: mp886x: support mp8864
regulator: mp886x: add MP8864 support

 .../bindings/regulator/mps,mp886x.yaml        | 16 +++++++++++--
 drivers/regulator/Kconfig                     |  2 +-
 drivers/regulator/mp886x.c                    | 23 +++++++++++++++++--
 3 files changed, 36 insertions(+), 5 deletions(-)
Signature · 1 line
2.51.0