Skip to content

SpacemiT K3 use 8gb memory size on CoM260 and Pico-ITX

E Shattow linux-devicetree linux-riscv lkml spacemit 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest2 patches 0 repliesNew

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2riscv: dts: spacemit: k3: use com260 8gb memory configurationarch/riscv/boot/dts/spacemit/k3-com260.dtsi+1 -10 replies
2/2riscv: dts: spacemit: k3: use pico-itx 8gb memory configurationarch/riscv/boot/dts/spacemit/k3-pico-itx.dts+1 -10 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/2] SpacemiT K3 use 8gb memory size on CoM260 and Pico-ITX

Adjust from 16GiB to 8GiB memory size configuration on CoM260 and Pico-ITX for compatibility with 8GiB/16GiB/32GiB configurations.

It is expected that the bootloader will read EEPROM TLV value for ID of the EEPROM part and adjust the device tree node accordingly. In the simple case where adjustment is not performed however, then the previous 16GiB range may overflow a 8GiB DRAM optioned board.

DeepComputing FML13v05 is sold in 16GiB/32GiB variants and not 8GiB so it remains as 16GiB configuration.

E Shattow (2):
riscv: dts: spacemit: k3: use com260 8gb memory configuration
riscv: dts: spacemit: k3: use pico-itx 8gb memory configuration

 arch/riscv/boot/dts/spacemit/k3-com260.dtsi  | 2 +-
 arch/riscv/boot/dts/spacemit/k3-pico-itx.dts | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

base-commit: fa2933aac170dd19c6a7f0d7b81a8f537e40915c

Signature · 1 line
2.53.0