Skip to content

board: toradex: add Verdin iMX8MM 2GB WB IT v1.0a

Marcel Ziswiler u-boot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest5 patches 0 repliesNew

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/5dt-bindings: pinctrl: imx8mm: add alternative uart muxings+0 -00 replies
2/5toradex: tdx-cfg-block: add Verdin i.MX8MM support+0 -00 replies
3/5board: toradex: add Verdin iMX8MM 2GB WB IT v1.0a+0 -00 replies
4/5board: toradex: verdin-imx8mm: add README+0 -00 replies
5/5board: toradex: verdin-imx8mm: add MAINTAINERS+0 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH v1 0/5] board: toradex: add Verdin iMX8MM 2GB WB IT v1.0a

Hi Igor

BTW: Enjoy your well deserved vacation. I will pick it up and send a v2 don't worry (;-p).

Quoted 3 lines · Igor Opaniuk

This add initial minimal support for the Toradex Verdin iMX8MM 2GB WB IT
V1.0A module.

We just got the final SKU naming update and this one will be called Toradex Verdin iMX8M Mini Quad 2GB WB IT V1.0A.

Quoted 4 lines

They are now strapped to boot from eFuses which are factory fused to properly boot from their on-module eMMC. U-Boot supports booting from the on-module eMMC only, SDP support is disabled for now.

Due to missing i.MX 8M Mini USB support that is.

Quoted 2 lines

Functionality wise the following is known to be working:
- eMMC, 8-bit and 4-bit MMC/SD card slots

Note that while the eMMC is 8-bit the boot ROM only supports booting in a 4-bit configuration. Thank you NXP!

Quoted 66 lines

- Ethernet
- GPIOs
- I2C

Boot sequence is:
SPL ---> ATF (TF-A) ---> U-boot proper

ATF, U-boot proper and u-boot.dtb images are packed into FIT image, loaded by SPL.

Boot:
U-Boot SPL 2020.01-01840-gd92bdc79cf-dirty (Jan 22 2020 - 18:50:57 +0200)
Normal Boot
Trying to boot from MMC1

U-Boot 2020.01-01840-gd92bdc79cf-dirty (Jan 22 2020 - 18:50:57 +0200)

CPU:   Freescale i.MX8MMQ rev1.0 at 0 MHz
Reset cause: POR
DRAM:  2 GiB
MMC:   FSL_SDHC: 0, FSL_SDHC: 1
Loading Environment from MMC... OK
In:    serial
Out:   serial
Err:   serial
Model: Toradex Verdin iMX8M Mini 2GB Wi-Fi / BT IT V1.0A, Serial#
06535148
Net:   Could not get PHY for FEC0: addr 7
eth0: ethernet at 30be0000
Hit any key to stop autoboot:  0

Igor Opaniuk (3):
board: toradex: add Verdin iMX8MM 2GB WB IT v1.0a
board: toradex: verdin-imx8mm: add README
board: toradex: verdin-imx8mm: add MAINTAINERS

Marcel Ziswiler (1):
toradex: tdx-cfg-block: add Verdin i.MX8MM support

Max Krummenacher (1):
dt-bindings: pinctrl: imx8mm: add alternative uart muxings

 arch/arm/dts/Makefile                       |    3 +-
 arch/arm/dts/imx8mm-pinfunc.h               |   21 +
 arch/arm/dts/imx8mm-verdin-u-boot.dtsi      |  103 ++
 arch/arm/dts/imx8mm-verdin.dts              |  854 +++++++++
 arch/arm/mach-imx/imx8m/Kconfig             |    7 +
 board/toradex/common/tdx-cfg-block.c        |   17 +-
 board/toradex/common/tdx-cfg-block.h        |    1 +
 board/toradex/verdin-imx8mm/Kconfig         |   30 +
 board/toradex/verdin-imx8mm/MAINTAINERS     |    9 +
 board/toradex/verdin-imx8mm/Makefile        |   12 +
 board/toradex/verdin-imx8mm/README          |   81 +
 board/toradex/verdin-imx8mm/imximage.cfg    |   16 +
 board/toradex/verdin-imx8mm/lpddr4_timing.c | 1851
+++++++++++++++++++
 board/toradex/verdin-imx8mm/spl.c           |  183 ++
 board/toradex/verdin-imx8mm/verdin-imx8mm.c |   74 +
 configs/verdin-imx8mm_defconfig             |   88 +
 include/configs/verdin-imx8mm.h             |  121 ++
 17 files changed, 3468 insertions(+), 3 deletions(-)
 create mode 100644 arch/arm/dts/imx8mm-verdin-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx8mm-verdin.dts
 create mode 100644 board/toradex/verdin-imx8mm/Kconfig
 create mode 100644 board/toradex/verdin-imx8mm/MAINTAINERS
Quoted 8 lines
 create mode 100644 board/toradex/verdin-imx8mm/Makefile
 create mode 100644 board/toradex/verdin-imx8mm/README
 create mode 100644 board/toradex/verdin-imx8mm/imximage.cfg
 create mode 100644 board/toradex/verdin-imx8mm/lpddr4_timing.c
 create mode 100644 board/toradex/verdin-imx8mm/spl.c
 create mode 100644 board/toradex/verdin-imx8mm/verdin-imx8mm.c
 create mode 100644 configs/verdin-imx8mm_defconfig
 create mode 100644 include/configs/verdin-imx8mm.h

Cheers

Marcel