Skip to content

scsi: SAS: Makefile and Kconfig

Luben Tuikov linux-scsi lkml 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest3 patches 0 repliesNew

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/3sas_class: include files in include/scsi/sas/include/scsi/sas/sas.h include/scsi/sas/sas_class.h include/scsi/sas/sas_discover.h +7 more+1725 -00 replies
2/3sas-class: core files+0 -00 replies
3/3aic94xx: The aic94xx SAS LLDD+0 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 2.6.13-mm2 0/3] scsi: SAS: Makefile and Kconfig

Andrew,

The following is a patchset of the SAS code as posted today but it has the suggestions by Nish and Alexey, and it is against -mm2 tree.

Signed-off-by Luben Tuikov <[email protected]>
drivers/scsi/Kconfig +12 -0
diff -X linux-2.6.13-mm2/Documentation/dontdiff -Nau linux-2.6.13-mm2-orig/drivers/scsi/Kconfig linux-2.6.13-mm2/drivers/scsi/Kconfig
@@ -260,6 +260,16 @@
 
 endmenu
 
+
+menu "SCSI Transport Layers"
+
+depends on SCSI
+
+source "drivers/scsi/sas-class/Kconfig"
+
+endmenu
+
+
 menu "SCSI low-level drivers"
 	depends on SCSI!=n
 

@@ -330,6 +340,8 @@
 	  To compile this driver as a module, choose M here: the
 	  module will be called wd7000.
 
+source "drivers/scsi/aic94xx/Kconfig"
+
 config SCSI_ACARD
 	tristate "ACARD SCSI support"
 	depends on PCI && SCSI
drivers/scsi/Makefile +2 -0
diff -X linux-2.6.13-mm2/Documentation/dontdiff -Nau linux-2.6.13-mm2-orig/drivers/scsi/Makefile linux-2.6.13-mm2/drivers/scsi/Makefile
@@ -31,6 +31,7 @@
 obj-$(CONFIG_SCSI_SPI_ATTRS)	+= scsi_transport_spi.o
 obj-$(CONFIG_SCSI_FC_ATTRS) 	+= scsi_transport_fc.o
 obj-$(CONFIG_SCSI_ISCSI_ATTRS)	+= scsi_transport_iscsi.o
+obj-$(CONFIG_SAS_CLASS)		+= sas-class/
 
 obj-$(CONFIG_ISCSI_TCP) 	+= iscsi_tcp.o
 obj-$(CONFIG_SCSI_AMIGA7XX)	+= amiga7xx.o	53c7xx.o

@@ -64,6 +65,7 @@
 obj-$(CONFIG_SCSI_AIC7XXX)	+= aic7xxx/
 obj-$(CONFIG_SCSI_AIC79XX)	+= aic7xxx/
 obj-$(CONFIG_SCSI_AACRAID)	+= aacraid/
+obj-$(CONFIG_SCSI_AIC94XX)	+= aic94xx/
 obj-$(CONFIG_SCSI_AIC7XXX_OLD)	+= aic7xxx_old.o
 obj-$(CONFIG_SCSI_ARCMSR)	+= arcmsr/
 obj-$(CONFIG_SCSI_IPS)		+= ips.o

Read the cover letter in its thread