PCI legacy I/O port free driver (take 6)
Get series with b4
b4 am [email protected]Versions newest first
- v1 Latest4 patches 3 repliesIn review
Patches in v1 No applies recorded yet
| # | Subject and files | Size | Replies | Applied |
|---|---|---|---|---|
| 1/4 | PCI legacy I/O port free driver (take 6) - Changes to generic PCI codedrivers/ drivers/ include/ | +37 | 2 replies | |
| 2/4 | PCI legacy I/O port free driver (take 6) - Update Documentation/pci.txtDocumentation/ | +67 | 1 reply | |
| 3/4 | PCI legacy I/O port free driver (take 6) - Make Intel e1000 driver legacy I/O port freedrivers/ drivers/ | +71 | 0 replies | |
| 4/4 | PCI legacy I/O port free driver (take 6) - Make Emulex lpfc driver legacy I/O port freedrivers/ | +2 | 0 replies |
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.
Cover letter [PATCH 2.6.16-mm1 0/4] PCI legacy I/O port free driver (take 6)
Hi Greg,
I've updated the series of patches for PCI legacy I/O port free driver to be applied to 2.6.16-mm1. The previous version of patches conflicts with some changes to e1000 driver. I also confirmed the updated one can be applied to 2.6.16-git7 though I got some warnings.
I'm attaching the brief description below about what the problem I'm trying to solve is.
Thanks,
Kenji Kaneshige
Brief Description
~~~~~~~~~~~~~~~~~
I encountered a problem that some PCI devices don't work on my system which have huge number of PCI devices.
It is mandatory for all PCI device drivers to enable the device by calling pci_enable_device() which enables all regions probed from the device's BARs. If pci_enable_device() failes to enable any regions probed from BARs, it returns as error. On the large servers, I/O port resource could not be assigned to all PCI devices because it is limited (64KB on Intel Architecture[1]) and it would be fragmented (I/O base register of PCI-to-PCI bridge will usually be aligned to a 4KB boundary[2]). In this case, the devices which have no I/O port resource assigned don't work because pci_enable_device() for those devices failes. This is what happened on my machine.
---
[1]: Some machines support 64KB I/O port space per PCI segment. [2]: Some P2P bridges support optional 1KB aligned I/O base.
Here, there are many PCI devices that provide both I/O port and MMIO interface, and some of those devices can be handled without using I/O port interface. The reason why such devices provide I/O port interface is for compatibility to legacy OSs. So this kind of devices should work even if enough I/O port resources are not assigned. The "PCI Local Bus Specification Revision 3.0" also mentions about this topic (Please see p.44, "IMPLEMENTATION NOTE"). On the current linux, unfortunately, this kind of devices don't work if I/O port resources are not assigned, because pci_enable_device() for those devices fails.