Skip to content

proposal for dynamic configurable netconsole

Keiichi KII lkml netdev 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest4 of 5 patches 2 repliesIn review

4 of 5 patches are in this archive. The cover letter announces 5.

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/5marking __initdrivers/net/netconsole.c.cleanup+2 -20 replies
3/5add interface for netconsole using sysfsdrivers/net/netconsole.c.sysfs+238 -42 replies
4/5switch function of netpolldrivers/net/netconsole.c.switch+57 -30 replies
5/5add "add" element in /sys/class/misc/netconsoledrivers/net/netconsole.c.add+27 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH -mm take2 0/5] proposal for dynamic configurable netconsole

From: Keiichi KII <[email protected]>

The netconsole is a very useful module for collecting kernel message under certain circumstances(e.g. disk logging fails, serial port is unavailable).

But current netconsole is not flexible. For example, if you want to change ip address for logging agent, in the case of built-in netconsole, you can't change config except for changing boot parameter and rebooting your system, or in the case of module netconsole, you need to remove it and reload with different parameters.

So, I propose the following extended features for netconsole.

1) support for multiple logging agents.
2) add interface to access each parameter of netconsole using sysfs.

This patch is for linux-2.6.20-rc1-mm1 and is divided to each function. Your comments are very welcome.

---

Signature · 3 lines
Keiichi KII
NEC Corporation OSS Promotion Center
E-mail: [email protected]