Skip to content

TQM5200, CM5200 and Motion-PRO support

Marian Balakowicz linuxppc-dev 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest15 patches 42 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/15TQM5200 DTSarch/powerpc/boot/dts/tqm5200.dts+217 -06 replies
2/15TQM5200 defconfigarch/powerpc/configs/tqm5200_defconfig+1303 -00 replies
3/15TQM5200 board supportarch/powerpc/platforms/52xx/Kconfig arch/powerpc/platforms/52xx/Makefile arch/powerpc/platforms/52xx/tqm5200.c+180 -011 replies
4/15CM5200 DTSarch/powerpc/boot/dts/cm5200.dts+284 -05 replies
5/15CM5200 defconfigarch/powerpc/configs/cm5200_defconfig+1032 -00 replies
6/15CM5200 board supportarch/powerpc/platforms/52xx/Kconfig arch/powerpc/platforms/52xx/Makefile arch/powerpc/platforms/52xx/cm5200.c+167 -02 replies
7/15Promess Motion-PRO DTSarch/powerpc/boot/dts/motionpro.dts+334 -07 replies
8/15Promess Motion-PRO defconfigarch/powerpc/configs/motionpro_defconfig+914 -00 replies
9/15Promess Motion-PRO board supportarch/powerpc/platforms/52xx/Kconfig arch/powerpc/platforms/52xx/Makefile arch/powerpc/platforms/52xx/motionpro.c+182 -02 replies
10/15Add mpc52xx_find_and_map_path(), refactor utility functions.arch/powerpc/platforms/52xx/mpc52xx_common.c include/asm-powerpc/mpc52xx.h+18 -41 reply
11/15Motion-PRO: Add LED support.arch/powerpc/configs/motionpro_defconfig arch/powerpc/platforms/52xx/motionpro.c drivers/leds/Kconfig +3 more+274 -11 reply
12/15Add mpc52xx_restart(), mpc52xx_halt(), mpc52xx_power_off().arch/powerpc/platforms/52xx/mpc52xx_common.c include/asm-powerpc/mpc52xx.h+52 -02 replies
13/15Init restart/halt/power_off machine hooks for TQM5200.arch/powerpc/platforms/52xx/tqm5200.c+3 -00 replies
14/15Init restart/halt/power_off machine hooks for CM5200.arch/powerpc/platforms/52xx/cm5200.c+3 -00 replies
15/15Init restart/halt/power_off machine hooks for Motion-PRO.arch/powerpc/platforms/52xx/motionpro.c+3 -00 replies

Reviews trailers per patch

1 of 15 patches has a Reviewed-by or Acked-by.

PatchGrant Likely
1/15
2/15
3/15
4/15
5/15
6/15
7/15
8/15
9/15
10/15R-b
11/15
12/15
13/15
14/15
15/15

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [PATCH 00/15] [POWERPC] TQM5200, CM5200 and Motion-PRO support

Hello,

The following series of patches adds arch/powerpc support for three MPC5200 based boards:
TQM5200, CM5200 and Motion-PRO.

Included are also patches with modifications to common 52xx code. New helper routine mpc52xx_find_and_map_path() is added, and is being used in LED driver for Motion-PRO. Another patch adds mpc52xx_restart(), mpc52xx_halt() and mpc52xx_power_off(). This modification has been around for some time now and relies on Sascha Hauer's patch.

01/15 [POWERPC] TQM5200 DTS
02/15 [POWERPC] TQM5200 defconfig
03/15 [POWERPC] TQM5200 board support
04/15 [POWERPC] cm5200 DTS
05/15 [POWERPC] cm5200 defconfig
06/15 [POWERPC] cm5200 board support
07/15 [POWERPC] Promess motionpro DTS
08/15 [POWERPC] Promess motionpro defconfig
09/15 [POWERPC] Promess motionpro board support
10/15 [POWERPC] Add mpc52xx_find_and_map_path(), refactor utility functions. 11/15 [POWERPC] Motion-PRO: Add LED support.
12/15 [POWERPC] Add mpc52xx_restart(), mpc52xx_halt(), mpc52xx_power_off(). 13/15 [POWERPC] Init restart/halt/power_off machine hooks for tqm5200. 14/15 [POWERPC] Init restart/halt/power_off machine hooks for cm5200. 15/15 [POWERPC] Init restart/halt/power_off machine hooks for motionpro.

Comments and review notes are welcome.

Cheers,
Marian Balakowicz

Read the cover letter in its thread