DM9000: Several fixes/cleanups for the DM9000A controller
Get series with b4
b4 am [email protected]Versions newest first
- v1 Latest0 of 6 patches 0 repliesNew
Patches in v1 No applies recorded yet
None of the 6 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.
Cover letter [U-Boot-Users] [patch 0/6] DM9000: Several fixes/cleanups for the DM9000A controller
Wolfgang,
Is the merge window open for the rest of today, or is it closed? If open, I'll look at this patch set later today and act on it. Otherwise this goes into the 'for later' bin.
regards,
Ben
Quoted 18 lines · Remy Bohmer
The following 6 patches contain several fixes and cleanups for the DM9000A network controller. It turned out that the U-boot DM9000 driver was not working with this particular version of the DM9000 series.
At low speeds (10MBit) it was sometimes capable of getting a peer-2-peer connection, but 100MBit did not work at all, also connecting the board to a corporate network did not work at any speed.
Looking deeper at the code it turned out that many things where done different than recommended in the Application Notes and Programming Guides for these controllers. Doing the things as recommended solved the problems with the DM9000A.
The complete series has been tested with the Atmel AT91SAM9261-EK, and a custom board, with the DM9000[A|E|EP] controllers.
Signed-off-by Remy Bohmer <[email protected]>