Add multi-chips support for NAND, FSL-UPM and TQM8548
Get series with b4
b4 am [email protected]Versions newest first · linked by author and title
- v2 Latest0 of 5 patches 0 repliesNew
- v13 of 4 patches 0 repliesSuperseded
Patches in v2 No applies recorded yet
None of the 5 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v2 yet.
Cover letter [U-Boot] Fwd: [PATCH v2 0/5] Add multi-chips support for NAND, FSL-UPM and TQM8548
Quoted 8 lines · arun sharma
Quoted 1 line
* Index:
u-boot/drivers/mtd/nand/fsl_upm.c*>* =================================================================== *>* ---
u-boot.orig/drivers/mtd/nand/fsl_upm.c
*>* +++u-boot/drivers/mtd/nand/fsl_upm.c
*>* @@ -90,8 +90,11 @@ static void fun_cmd_ctrl(structmtd_info*>* mar = cmd << (32 - fun->width); *>* io_addr = fun->upm.io_addr; *>* #if CONFIG_SYS_NAND_MAX_CHIPS > 1
Quoted 10 lines
*>* - if (
fun->chip_nr> 0)
*>* + if (fun->chip_nr> 0) {
*>*io_addr+=fun->chip_offset*fun->chip_nr;
*>* + if (fun->upm_mar_chip_offset)
*>* + mar |=fun->upm_mar_chip_offset*fun->chip_nr;
*>* + }
*
above patch is not suitable for 832x becuase mar register has only 26 bit (6 bit are resrved)
what should be done
Simply do not define fun->upm_mar_chip_offset in your BSP code. It is used on the TQM8548 modules to driver some board-specific chip select logic. Anyhow, do you need to support a multi-chip (multi-die) device all?
Wolfgang.