Skip to content

libata: Add OCTEON Compact Flash driver.

David Daney linux-ide linux-mips 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest2 patches 1 replyIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2libata: Add another column to the ata_timing table.drivers/ata/libata-core.c include/linux/libata.h+43 -380 replies
2/2libata: New driver for OCTEON SOC Compact Flash interface (v6).drivers/ata/Kconfig drivers/ata/Makefile drivers/ata/pata_octeon_cf.c+966 -01 reply

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/2] libata: Add OCTEON Compact Flash driver.

Greetings ata hackers,

Linus recently merged support for the mips/Octeon cpu.

Please consider adding this driver for the Compact Flash system present on many of the OCTEON development boards.

This is a two part patch set, the first part adds a new column to the ata_timing table (for dmack_hold). This is used by the second patch which is the driver itself.

I will reply with the two patches.

Thanks,

David Daney (2):
libata: Add another column to the ata_timing table.
libata: New driver for OCTEON SOC Compact Flash interface (v6).

 drivers/ata/Kconfig          |    9 +
 drivers/ata/Makefile         |    1 +
 drivers/ata/libata-core.c    |   72 ++--
 drivers/ata/pata_octeon_cf.c |  956 
++++++++++++++++++++++++++++++++++++++++++
 include/linux/libata.h       |    9 +-
 5 files changed, 1009 insertions(+), 38 deletions(-)
 create mode 100644 drivers/ata/pata_octeon_cf.c