Skip to content

RFC Introduce metadata cache feature

Takahiro Yasui lvm-devel 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 RFC Latest0 of 7 patches 2 repliesIn review

Patches in v1 No applies recorded yet

None of the 7 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [RFC PATCH 0/7] Introduce metadata cache feature

Hi,

This patch set introduces the metadata cache feature to reduce I/Os issued by lvm commands. This is still prototype and is not even fully tested, but let me post it to discuss its design and implementation.

Any comments and suggestions are welcome.

PATCH SET
=========

1/7: remove device scan from _text_create_text_instance 2/7: rename _has_scanned to _need_scan
3/7: separate metadata parse and verification 4/7: support metadata cache feature
5/7: add metadata cache interface
6/7: individual lvm command settings
7/7: introduce metadata cache feature

BACKGROUND
==========

In the current implementation of lvm commands, all devices except for devices filtered by configuration are scanned every time lvm commands are executed. Information of physical volume, volume group and logical volume are stored only in the metadata area on each real devices, and reading these metadata from devices are required in order to figure out the lvm structure in the system and to check their consistency. This implementation provides high reliability.

On the other hand, device scan is done every time lvm commands are executed, and many "READ I/O" are issued to those devices. This behavior causes the following problems.

* Command execution time

Each lvm command scans all devices even though devices don't belong to the target logical volume (LV) and volume group (VG) and not related to the operation. This may cause a long operation time.

For example, on the system with 1000 physical volumes (PV) and VG (vg0) composed of PV(pv0), the lvm command, 'vgdisplay vg0', scans 1000 PVs and issues READ I/Os to all PVs. In this case, accessing only to pv0 by vgdisplay is desirable.

* Maintenance issues

Once a device got problems and replied no response, each lvm command will be timed-out even if the target devices are not broken, and lvm commands take much longer to be completed. This prevents quick system maintenance and recovery.

* Blockage of mirrored structure

Once I/O errors are detected by device-mapper in the kenrnel and are noticed to dmeventd, it handles failure recovery. In case of an error on mirrored volume, dmeventd calls lvm command (vgreduce) internally and tries to remove bad volumes. Here, vgreduce scans all PVs. If there is a bad device which is not related to the mirror and causes timeout for I/Os, blockage process takes a long time and stops user applications during the long recovery.

Accessing only to target devices by lvm commands are strongly required. This prototype patch solves the first two issues now, but the last issue has not been covered yet.

DESIGN OVERVIEW
===============

* Fill lvmcache using metadata cache

In the current lvmcache implementation, device scan is not generally triggered when requested information is on lvmcache. To meet this condition, metadata cache files are read from cache directory and loaded into lvmcache before the command specific functions are executed.

In addition, the CACHE_INVALID flag is set to cache data when metadata cache is loaded into lvmcache so that the cache should be verified when it is accessed.

* Separate metadata parse and device verification

In the current implementation, parse and verification process are done together in _reav_pv function. When physical volume is parsed in the metadata area, devices related physical volumes are accessed and verified.

To utilize the parse functions, _read_vg and _read_pv, by metadata cache feature, device verification procedures are removed out of metadata parse functions, and merged into post procedures. When parse is done, the DEV_NEED_VERIFY flag is set to the device structures so that devices will be verified later.

* Use text metadata format as cache file

lvm commands have already functions to read and write metadata into text files in the specified directory, which are used by backup or archive. The metadata cache feature handles cache files of the same format with these functions.

CONFIG SETTING
==============

The "backup/metadata_cache" parameter is added in the lvm configuration file, lvm.conf, to enable and disable this metadata cache feature.

* lvm.conf

  backup {
      ....
      metadata_cache = 1   # enable
  }

EXECUTION EXAMPLES
==================

* Test environment

VG (16 VGs): vg-sd[c-r]
PV (16 PVs): /dev/sd[c-r]

  # pvs -a
    PV         VG   Fmt  Attr PSize  PFree
    /dev/sdc   vg-sdc lvm2 a-   16.00G 16.00G
    /dev/sdd   vg-sdd lvm2 a-   16.00G 16.00G
    ...
    /dev/sdr   vg-sdr lvm2 a-   16.00G 16.00G

* Example

This results show how much I/Os are reduced by the metadata cache feature.

a) *without* metadata cache

    # strace -e open,read vgs vg-sdc
    ...
    open("/dev/sdq", O_RDONLY|O_DIRECT|O_LARGEFILE|O_NOATIME) = 4
      <READ IO (4KB) to /dev/sdq: 4 times>
    open("/dev/sdr", O_RDONLY|O_DIRECT|O_LARGEFILE|O_NOATIME) = 4
      <READ IO (4KB) to /dev/sdr: 4 times>
    open("/dev/sdc", O_RDONLY|O_DIRECT|O_LARGEFILE|O_NOATIME) = 4
      <READ IO (4KB) to /dev/sdc: 4 times>
    ....
    open("/dev/sdp", O_RDONLY|O_DIRECT|O_LARGEFILE|O_NOATIME) = 5
      <READ IO (4KB) to /dev/sdp: 4 times>
      <READ IO (4KB) to /dev/sdc: 3 times>

=> Total 67 READ I/Os
(7 READ I/Os to /dev/sdc and 4 READ I/Os to /dev/sd[d-r])

b) *with* metadta cache

    # strace -e open,read vgs vg-sdc
    ...
    open("/dev/sdc", O_RDONLY|O_DIRECT|O_LARGEFILE|O_NOATIME) = 4
      <READ IO (4KB) to /dev/sdc: 7 times>

=> Total 7 READ I/Os
(7 READ I/Os to /dev/sdc)

* I/O statistics

Here shows an example of the number of I/Os issued by lvm commands. (NOTE: The results might be different in the environment.)

                      <WITHOUT metadata cache>  <WITH metadata cache>
                      Total sdc sdd .. sdq sdr  Total sdc sdd .. sdq sdr
  ------------------- ----- ------------------  ----- ------------------
  vgscan                128   8   8 ...  8   8    128   8   8 ...  8   8
  ------------------- ----- ------------------  ----- ------------------
  vgs                   236  14  14 ... 14  11    176  11  11 ...  11 11
  vgs <vg>               67   7   4 ...  4   4      7   7   0 ...   0  0
  ------------------- ----- ------------------- ----- ------------------
  lvs                   236  14  14 ... 14  11    176  11  11 ...  11 11
  lvs <lv>               67   7   4 ...  4   4      7   7   0 ...   0  0
  ------------------- ----- ------------------- ----- ------------------
  lvcreate -L12m <vg>    84  24   4 ...  4   4     24  24   0 ...   0  0
  lvremove <vg>/<lv>     85  25   4 ...  4   4     25  25   0 ...   0  0
  ------------------- ----- ------------------- ----- ------------------
  vgchange -ay          236  15  15 ...  15 11    176  11  11 ...  11 11
  vgchange -ay <vg>      67   7   4 ...   4  4      7   7   0 ...   0  0
  ------------------- ----- ------------------- ----- ------------------
  vgcreate <vg> <pv>    103  16   6 ...   5  5     90  15   5 ...   5  5
  vgremove <vg>          75  15   4 ...   4  4     15  15   0 ...   0  0

------------------- ----- ------------------- ----- ------------------

FUTURE WORKS
============

* Independent cache directory

This prototype codes use metadata backup files as cache files, but cache files are better maintained in their own directory. To keep these cache files valid in the cache directory, they might need to be cleaned up after system boot, or revalidated by some lvm commands, such as vgscan.

* Apply metadata cache feature to lvm commands which change lvm structure

lvm commands which change lvm structure, such as vgreduce and vgextend, still access all devices even with this feature. To avoid device scans by these lvm commands, some enhancements for lvm commands are needed.

* Add commandline option

Add a new commandline option (ex --metadatacache y|n) to enable and disable cache feature in order to override a setting of the lvm configuration file.

* Testing

More tests under device failures and cache inconsistency.

Regards,
---
Takahiro Yasui
Hitachi Computer Products (America) Inc.