Skip to content

libahci and friends

Jeff Garzik linux-ide lkml 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest3 patches 1 replyIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/3Create libahci. Move Marvell support to mv-ahci.drivers/ata/Kconfig drivers/ata/Makefile drivers/ata/ahci.c +3 more+2429 -19860 replies
2/3mv-ahci: Add PATA supportdrivers/ata/ahci.h drivers/ata/libahci.c drivers/ata/mv-ahci.c+520 -590 replies
3/3New 'acard-ahci' driver for Acard ATP8620 supportdrivers/ata/Kconfig drivers/ata/Makefile drivers/ata/acard-ahci.c +3 more+462 -930 replies

Reviews trailers per patch

None of the 3 patches has a Reviewed-by or Acked-by.

PatchJeff Garzik
1/3NOT-Signed-off-by
2/3NOT-Signed-off-by
3/3NOT-Signed-off-by

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [PATCH 0/3] libahci and friends

This patchset creates libahci, as mentioned in the recent NVMHCI thread:
http://marc.info/?l=linux-kernel&m=123947130114037&w=2

Although these changes help set the groundwork for NVMHCI support, they are also more immediately useful in three cases:

- Marvell PATA support. Marvell 6101, 6121, 6145 (and others?) added a PATA support to an existing AHCI SATA design. The controller supports both PATA and SATA. SATA is compatible with AHCI. PATA uses new DMA data structures and reset methods.

- ACard support. ATP 8620 is a 99% AHCI clone, that primarily differs in its DMA data structures.

- non-PCI support. Sagar Borikar posted some preliminary work, getting AHCI going on a non-PCI bus. My libahci work should hopefully assist Sagar. http://marc.info/?l=linux-ide&m=123807608819226&w=2

Regards,

Jeff