Skip to content

arm nomadik: gpio and i2c

Heiko Schocher u-boot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest0 of 2 patches 0 repliesNew

Patches in v1 No applies recorded yet

None of the 2 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [U-Boot] [PATCH 0/2] arm nomadik: gpio and i2c

Hello Wolfgang,

Quoted 11 lines · Wolfgang Denk

Dear Alessandro Rubini,

Quoted 5 lines · In message <[email protected]> you wrote:

To use soft_i2c I need to define some macros in the config file. Instead of writing hard numbers there I called the gpio functions, but the config file is inluded from asm sources as well. I don't think my approach is beautiful at all (both #ifndef __ASSEMBLY__ and #include "../board/"), but I didn't find a better solution.

Agreed. It's a bit intricate to get this done, but I don't see a better way either.

Hmm.. maybe my previous patch is a better solution?

Quoted 13 lines
Quoted 6 lines

I would like to add a gpio command, and I've found no generic gpio stuff. Only one board (cm-bf527) has a gpio commands, but quite a few have similar commands to set leds or other bits. Is time ripe for a generic gpio driver with board-specific limits and operations? Would that be interesting for u-boot-next? Should I process with a board-specific gpio command by now?

Well, my opinion on that is a clear "yes, but..." :-)

Yes, some generic gpio framework would be nice - for example, if it would allow us to get rid of the 14 largely similar "led.c" files, to name just one.

Quoted 5 lines

On the other hand, the design of such a framework should be lean and not necessarily try to cover 100% of all possible use cases - I'd rather have a small and beautiful solution that covers 90% of the cases and use board-specific exceptions where really needed, instead of a fat thing that solves each and every problem but costs 50 kB.

Agreed. So we need an gpio_core.c / .h which defines the following functions (just a proposal):

typedef struct gpio_adapter {
	int	(*init_pin)(int pin);
	int	(*set)(int pin, value);
	int	(*get)(int pin);
	int	(*dir)(int pin, int direction);	
	int	(*level)(int pin, int level);
}

int gpio_init(gpio_adapter *adap);
int gpio_init_pin(pin);
? maybe with setting a marker, that this pin is initialized,
so this can be checked in the above functions ... ?
int gpio_set(pin, value);
int gpio_get(pin);
int gpio_dir(pin, dir);
int gpio_level(pin, dir);

bye
Heiko