Make sure 85xx bss doesn't start at 0x0
Get series with b4
b4 am [email protected]Versions newest first
- v1 Latest0 of 2 patches 0 repliesNew
Patches in v1 No applies recorded yet
None of the 2 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.
Cover letter [U-Boot] [PATCH 0/2] Make sure 85xx bss doesn't start at 0x0
Quoted 28 lines · Peter Tyser
Quoted 15 lines · Wolfgang Denk
Dear Peter Tyser,
Quoted 5 lines · In message <[email protected]> you wrote:
I personally like the current implementation of putting the bss after the entire U-Boot image. It keeps U-Boot's code, malloc pool, stack, bss, etc all in the same general area which is nice, and has the side benefit that the bootpg won't be overwritten.
OK, if you think so...
Quoted 3 lines
I know ORing in
0x10is a bit ugly, but what's the real downside of doing it?Quoted 7 lines
Nothing. I just hate to allocate the bss at
0x0, because this is actually incorrect - it's the result of an address overflow / truncation, and pretty much misleading to someone trying to read and understand the code. For the linked image, it does not _look_ as if the bss was located _after_ the U-Boot image, it looks detached and allocated in low RAM.Do you have a preference Kumar? You're probably going to be the first in line to have to deal with any resulting confusion:)
Quoted 9 lines
I personally would rank the options:
1. OR in an offset to the bss address and leave some good comments in the linker script and commit message2. Make the bss the last section like other PPC boards which would result in the bootpg sometimes being overwritten
3. Put the bss at an arbitrary address
FWIW, I think an arbitrary address disjoint from the u-boot addresses is best. While u-boot is in ROM, you can't use the bss anyway. The bss will actually be located at an address selected by the u-boot code itself after memory is sized. All references to the bss will be re-located by subtracting the arbitrary start address and adding the run-time chosen start address. So the linked start address is not important, except that is cannot be NULL or it may confuse the relocation code that doesn't want to re-locate NULL pointers. Some of the confusion in this discussion probably stems from the fact that the linker scripts make the bss look like "part of u-boot", when it is really not. It is just a chunk of "zero'ed" ram, located anywhere the u-boot code decides to put it. An arbitrary strange address would make this more apparent.
Best Regards,
Bill Campbell
Quoted 10 lines
Best,
Peter_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot