Add s3c64xx SROM support and setup SMDK nCS1 for Ethernet
Get series with b4
b4 am [email protected]Versions newest first
- v1 Latest0 of 4 patches 0 repliesNew
Patches in v1 No applies recorded yet
None of the 4 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.
Cover letter [PATCH 0/4] Add s3c64xx SROM support and setup SMDK nCS1 for Ethernet
Quoted 7 lines · Andy Green
The following series adds platform defines for s3c64xx SROM unit, and uses it to configure nCS1 in the SMDK mach- file so the ethernet works regardless of what the bootloader may or may not have done.
It also adds a comment about how the SMDK must be physically configured to allow the Ethernet to work and removes a magic constant address.
Looks ok, will look at merging into my next-s3c64xx tree at somepoint soon.
Quoted 16 lines
---
Andy Green (4):
smdk6410-comment-ethernet-prerequisites.patch smdk6410-add-chipselect-setup.patch s3c64xx-add-srom-physical-virtual-mapping.patch s3c64xx-introduce-srom-registers.patcharch/arm/mach-s3c6400/include/mach/map.h | 14 ++++++ arch/arm/mach-s3c6410/mach-smdk6410.c | 37 ++++++++++++++- arch/arm/plat-s3c64xx/cpu.c | 5 ++ arch/arm/plat-s3c64xx/include/plat/regs-srom.h | 59 ++++++++++++++++++++++++ 4 files changed, 113 insertions(+), 2 deletions(-) create mode 100644 arch/arm/plat-s3c64xx/include/plat/regs-srom.h