Skip to content

ST-Ericsson Ux500 support

Tom u-boot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest8 patches 0 repliesNew

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/8Nomadik: move timer code to drivers/misc+0 -02 replies
2/8Nomadik: move gpio driver to drivers/gpio+0 -01 reply
3/8nomadik_gpio: get base address from platform code+0 -00 replies
4/8nomadik_mtu: support configurable clock rates+0 -00 replies
5/8ARM Cortex A8: ifdef code calling lowlevel init+0 -00 replies
6/8ux500: add SoC-specific code+0 -01 reply
7/8pl01x: add support for Ux500 variant of pl011+0 -00 replies
8/8mop500: add board-specific files+0 -03 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [U-Boot] [PATCH 0/8] ST-Ericsson Ux500 support
Quoted 1 line · Rabin Vincent

This series adds base support for ST-Ericsson's Ux500 series of Cortex-A9 based

The big change I would like to see with this patchset is for the arm_cortexa9 cpu be added.

Quoted 7 lines

SoCs. Several peripherals are shared with the Nomadik family, for which support already exists in U-Boot.

Note: The series must be applied on top of the patch "[PATCH V4] Nomadik: fix reset_timer()" posted by Alessandro Rubini on 2009-11-25:
http://lists.denx.de/pipermail/u-boot/2009-November/064800.html
Cc: Alessandro Rubini <[email protected]>

This patch has been applied to arm/next.
Thanks for explicilty calling it out here.

Tom

Quoted 11 lines

Rabin Vincent (8):
Nomadik: move timer code to drivers/misc
Nomadik: move gpio driver to drivers/gpio
nomadik_gpio: get base address from platform code
nomadik_mtu: support configurable clock rates ARM Cortex A8: ifdef code calling lowlevel init
ux500: add SoC-specific code
pl01x: add support for Ux500 variant of pl011
mop500: add board-specific files