Skip to content

tnetv107x cpsw ethernet switch driver

Ben Warren u-boot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest0 of 2 patches 0 repliesNew

Patches in v1 No applies recorded yet

None of the 2 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [U-Boot] [PATCH 0/2] tnetv107x cpsw ethernet switch driver

Hi Sandeep,

Quoted 17 lines · Sandeep
Quoted 8 lines

This patch series adds support for the cpsw ethernet switch found on tnetv107x
and other SoCs from Texas Instruments.

Cyril Chemparathy (2):
TI: netdev: add driver for cpsw ethernet device
TI: add tnetv107x evm board support for cpsw

Quoted 8 lines
  board/ti/tnetv107xevm/sdb_board.c |  155 +++++++
  drivers/net/Makefile              |    1 +
  drivers/net/cpsw.c                |  840
+++++++++++++++++++++++++++++++++++++
  include/configs/tnetv107x_evm.h   |   16 +
  include/netdev.h                  |   29 ++
  5 files changed, 1041 insertions(+), 0 deletions(-)

create mode 100644 drivers/net/cpsw.c

Quoted 4 lines

Ben,

Can you take a look at this series?

I started looking at it a week ago and something came up. My first impression is that the driver needs an include file. netdev.h is reserved for device driver prototypes and common definitions.

I'll try to give it a thorough review soon.

Quoted 2 lines

Regards,
Sandeep

regards,
Ben

Read the cover letter in its thread