Skip to content

Add support for Seagate FreeAgent DockStar

Thomas Weber u-boot 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest0 of 5 patches 3 repliesIn review

Patches in v1 No applies recorded yet

None of the 5 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [U-Boot] [PATCH 0/5] Add support for Seagate FreeAgent DockStar

Am 07.09.2010 16:28, schrieb Eric Cooper:

Quoted 31 lines

This patch series adds support for the Seagate FreeAgent DockStar. The DockStar is almost identical to the Marvell SheevaPlug, but has 256M of NAND flash, 128M of SDRAM, and different LED pins.

A new machine ID (2998) has already been registered for this device.

Alexander Holler (2):
DockStar: change RAM definitions to one bank (128 MB)
DockStar: config

Eric Cooper (3):
add DOCKSTAR machine type
DockStar: board support (derived from sheevaplug)
DockStar: LED support

 arch/arm/include/asm/mach-types.h   |   13 ++
 board/Marvell/dockstar/Makefile     |   51 ++++++++
 board/Marvell/dockstar/config.mk    |   28 +++++
 board/Marvell/dockstar/dockstar.c   |  185 +++++++++++++++++++++++++++++
 board/Marvell/dockstar/dockstar.h   |   41 +++++++
 board/Marvell/dockstar/kwbimage.cfg |  162 ++++++++++++++++++++++++++
 boards.cfg                          |    1 +
 include/configs/dockstar.h          |  217 +++++++++++++++++++++++++++++++++++
 8 files changed, 698 insertions(+), 0 deletions(-)
 create mode 100644 board/Marvell/dockstar/Makefile
 create mode 100644 board/Marvell/dockstar/config.mk
 create mode 100644 board/Marvell/dockstar/dockstar.c
 create mode 100644 board/Marvell/dockstar/dockstar.h
 create mode 100644 board/Marvell/dockstar/kwbimage.cfg
 create mode 100644 include/configs/dockstar.h
Quoted 4 lines

_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Hello Eric,

can you rework your patch set and send v2? Or do you need help?

Thomas