SD/MMC driver for MX25/35/51
Get series with b4
b4 am [email protected]Versions newest first
- v1 Latest0 of 6 patches 0 repliesNew
Patches in v1 No applies recorded yet
None of the 6 patches the cover letter announces are in this archive.
Reviews trailers per patch
| Patch | Anton Vorontsov | Eric B?nard |
|---|---|---|
| Series | A-b | T-b T-b |
Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.
Cover letter [PATCH 0/6] SD/MMC driver for MX25/35/51
Hi,
Le 13/10/2010 00:06, Arnaud Patard (Rtp) a ?crit :
Quoted 6 lines
Quoted 5 lines · Wolfram Sang
Here is the hopefully final (famous last words) version of my patch series. The first four are still updates/improvements for sdhci and sdhci-pltfm and are of generic interest, too. Thanks to Eric for the tests on MX25/35. Looking forward to comments/applied-to-mmc-next-messages ;)
Quoted 8 lines
Quoted 3 lines
The series is based on mmc-next as of today and also available at
git://git.pengutronix.de/git/wsa/linux-2.6.git pcm043-mmcI've tried it on a efika mx (to2 version) and I've a problem with the write-protect. It's on a GPIO and I don't see any way to configure the esdhc-imx driver to use it. Any idea on how it should be done ?
it's actually not yet supported by the driver. There is a wp_gpio in struct esdhc_platform_data (arch/arm/plat-mxc/include/mach/esdhc.h) but it's not yet used by the driver.
Also card detect using a GPIO is not implemented and card detect if actually done by polling.
Eric