Add ARM flat device tree support
Get series with b4
b4 am [email protected]Versions newest first
- v3 Latest0 of 7 patches 0 repliesNew
Patches in v3 No applies recorded yet
None of the 7 patches the cover letter announces are in this archive.
Reviews trailers per patch
| Patch | Gerald Van Baren |
|---|---|
| Series | A-b |
Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.
Cover letter [U-Boot] [PATCH v3 0/7] Add ARM flat device tree support
Dear John, Wolfgang,
The patch 4/7 looks good to me and runs on my MPC8360EMDS board (acked below). Wolfgang, if you would pull this directly, I would appreciate it.
Quoted 16 lines · Wolfgang Denk
Dear John Rigby,
Quoted 12 lines · In message<[email protected]> you wrote:
This new v3 series attempts to address all feedback received regarding v2.
Patch 1/7 and 2/7 (old 1/6) split in two with better commit message to explain what exactly the fixes do. Patch 3/7 (old 2/6) added CC to libfdt maintainer.
Patch 4/7 (old 3/6) fixed patch and better commit message and added another CC.
Patch 5/7 (old 4/6) changed the new CONFIG_*'s to CONFIG_SYS_*'s and documented them in README.
Patch 6/7 (old 5/6) Removed redundant ifdef, better commit message. Patch 7/7 (old 6/6) Unchanged.
Quoted 6 lines
Plase check and confirm if my understanding of this series is correct:
Patch 1/7 and 2/7 affect generic code and go through me.
Patch 3/7 affects FDT code and goes through Gerry (or Gerry AKC's and
tells me to pull it directly as part of the series).
[snip]
Quoted 6 lines
Is this understanding correct? So you need the ACKs from Scott,
Michal, and Gerry...Best regards,
Wolfgang Denk
Best regards,
gvb