Skip to content

new BSP for at91rm9200ek

Reinhard Meyer u-boot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest3 patches 0 repliesNew

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/3at91rm9200ek: convert to at91+0 -04 replies
1/3at91rm9200ek: convert to at91+0 -01 reply
1/3at91rm9200ek: convert to at91+0 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [U-Boot] [PATCH 0/3] new BSP for at91rm9200ek

Dear Andreas Bie?mann,

Quoted 23 lines

This patch series introduce new board support for at91rm9200ek. The derived code is now converted to new at91 code. Arm relocation is also implemented.

There where some tradeoffs regarding device support. Currently the code basis does not support all devices supported before. This includes
a) remove support for dataflash since i can not test it (yet, should follow in some weeks)
b) preloader support is disabled since NOR booting does not need any first stage loader
c) MMC/SD-card is currently not supported (but was not before)

Next steps are:
- get dataflash running
- remove at91rm9200_usart driver (should merge with atmel_usart)
- support MMC/SD-Card (also merge with current AT91/AVR32 implementation)
- merge emac/macb

Andreas Bie?mann (3):
at91rm9200ek: convert to at91
at91rm9200: enable USB support
at91rm9200ek: enbable USB support

Quoted 12 lines
 MAINTAINERS                               |    4 +
 arch/arm/include/asm/arch-at91/hardware.h |    1 +
 board/atmel/at91rm9200ek/Makefile         |    1 -
 board/atmel/at91rm9200ek/at91rm9200ek.c   |   58 ++-----
 board/atmel/at91rm9200ek/config.mk        |    3 +-
 board/atmel/at91rm9200ek/led.c            |   58 ++++----
 board/atmel/at91rm9200ek/misc.c           |   50 ------
 boards.cfg                                |    2 +-
 include/configs/at91rm9200ek.h            |  233 ++++++++---------------------
 9 files changed, 118 insertions(+), 292 deletions(-)
 delete mode 100644 board/atmel/at91rm9200ek/misc.c

Added V2 of the series to u-boot-atmel/at91.
Thanks,
Reinhard