Net Boot Controller
Get series with b4
b4 am [email protected]Versions newest first
- v1 Latest0 of 3 patches 0 repliesNew
Patches in v1 No applies recorded yet
None of the 3 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.
Cover letter [U-Boot] [PATCH 0/3] Net Boot Controller
Quoted 9 lines · tristan.lelong at blunderer.org
From: Tristan Lelong <[email protected]>
This patch allow to interrupt u-boot autoboot from remote PC and auto-reconfigure a netconsole redirected to this remote PC
Tristan Lelong (3):
Add support for Net Boot Controller (NBC) packet Add sendnbc tool to broadcast NBC magic packet Add the NBC + netconsole corresponding documentation
Hi Tristan,
Quoted 6 lines
common/main.c | 5 + doc/README.netconsole | 66 +++++++++++++++ include/net.h | 6 +- net/Makefile | 2 + net/nbc.c | 143 ++++++++++++++++++++++++++++++++ net/nbc.h | 39 +++++++++
Quoted 8 lines
net/net.c | 17 ++++ tools/Makefile | 6 ++ tools/sendnbc.c | 219 +++++++++++++++++++++++++++++++++++++++++++++++++ 9 files changed, 502 insertions(+), 1 deletions(-) create mode 100644 doc/README.netconsole create mode 100644 net/nbc.c create mode 100644 net/nbc.h create mode 100644 tools/sendnbc.c
Is NBC a standard ? Could you provide a link describing this protocol ?
I am quite confuse, this seems a way to replace DHCP in a simplest form to set up the ip address using some sort of knocking-port. As additional feature, the
Why cannot we reach the same result using the "Vendor Specific Information" (or another option field) of DHCP answer ? You can set there some infos that the target could understand.
It seems to me that the first packet is always sent to the broadcast address. What happens if we have two boards on the network, both waiting in autoboot ? Do they obtain the same ip address ?
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de =====================================================================