Skip to content

OMAP: fix build breaks on OMAP boards

Aneesh V u-boot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest0 of 6 patches 0 repliesNew

Patches in v1 No applies recorded yet

None of the 6 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [U-Boot] [PATCH 0/6] OMAP: fix build breaks on OMAP boards
Quoted 35 lines · Albert ARIBAUD

Hi Aneesh,

Le 07/06/2011 17:13, Aneesh V a ?crit :

Quoted 21 lines

Fix build breaks for OMAP boards.
All the build breaks were due to couple of missing defines in the config file, namely:

CONFIG_SYS_SDRAM_BASE and CONFIG_SYS_INIT_SP_ADDR

They have been fixed by providing the right SDRAM base address and by using SRAM base as the initial stack address.

None of these have been tested as I do not have any of these boards.

Aneesh V (6):
omap1610h2: fix build breaks
omap5912osk: fix build breaks
omap1510inn: fix build breaks
omap1610inn: fix build breaks
omap2420h4: fix build breaks
omap730p2: fix build breaks

Quoted 7 lines

include/configs/omap1510inn.h | 3 +++ include/configs/omap1610h2.h | 3 +++ include/configs/omap1610inn.h | 3 +++ include/configs/omap2420h4.h | 3 +++ include/configs/omap5912osk.h | 3 +++ include/configs/omap730p2.h | 3 +++

6 files changed, 18 insertions(+), 0 deletions(-)

Could you post a V2 series with a symbolic constant rather than a magic number for SP? Something like:

Quoted 7 lines

...
#define PHYS_SRAM 0x20000000
...
#define CONFIG_SYS_INIT_SP_ADDR PHYS_SRAM

... so that readers of the code know exactly that SP is set to SRAM base.

Will do.

Thanks,
Aneesh

Read the cover letter in its thread