xc3028: force reload of DTV7 firmware in VHF band with Zarlink demodulator
Get series with b4
b4 am [email protected]Versions newest first
- v1 Latest0 of 1 patch 12 repliesIn review
Patches in v1 No applies recorded yet
The patch the cover letter announces is not in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.
Cover letter [PATCH 0/1] xc3028: force reload of DTV7 firmware in VHF band with Zarlink demodulator
Hi All,
I have a Terratec Cinergy Hybrid T USB XS stick (USB 0ccd:0042). This device is made of the following components:
- Empiatech em2880 USB bridge;
- Zarlink zl10353 demodulator;
- Xceive XC3028 tuner;
For this device, the ZARLINK456 define is set to true so it is using the firmwares with type D2633 for the XC3028 tuner.
I found out that:
1) the DTV7 firmware works fine in VHF band (bw=7MHz);
2) the DTV8 firmware works fine in UHF band (bw=8MHz);
3) the DTV78 firmware works fine in UHF band (bw=8MHz) but it doesn not work at all in VHF band (bw=7MHz);
In fact, when the DTV78 firmware is loaded and I try to tune a VHF channel, the frequency lock is ciclically acquired for a second and immediately lost.
So the proposed patch forces a reload of the DTV7 firmware every time a 7MHz channel is requested.
The only drawback is that channel change from VHF to UHF or viceversa is slightly slower.
Devices using the D2620 firmwares are unaffected.
Best regards,
Gianluca Gennari