Skip to content

i.mx6q: Add the ethernet function support

Dirk Behme u-boot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest0 of 3 patches 0 repliesNew

Patches in v1 No applies recorded yet

None of the 3 patches the cover letter announces are in this archive.

Reviews trailers per patch

PatchDirk Behme
SeriesT-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [U-Boot] [PATCH 0/3] i.mx6q: Add the ethernet function support
Quoted 10 lines · Jason Liu

This patch add the ethernet function support for i.mx6q/arm2 board.

The patch has been tested ok by: Dirk Behme <[email protected]> on freescale i.mx6qarm2 board.

Jason Liu (3):
i.mx: i.mx6q: Add the enet clock function
fec: add the i.mx6q enet driver support
i.mx6q: arm2: Add the enet function support

Quoted 6 lines
 arch/arm/cpu/armv7/mx6/clock.c      |    5 ++
 board/freescale/mx6qarm2/mx6qarm2.c |   90 +++++++++++++++++++++++++++++++++++
 drivers/net/fec_mxc.c               |   10 ++++
 drivers/net/fec_mxc.h               |    7 ++-
 include/configs/mx6qarm2.h          |   13 ++++-
 5 files changed, 122 insertions(+), 3 deletions(-)

Whole series:

Tested-by Dirk Behme <[email protected]>

Thanks

Dirk

Read the cover letter in its thread