Skip to content

ARM: OMAP2+: Interrupt controllers adaptation to DT

Rob Herring linux-arm-kernel linux-devicetree linux-omap 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v2 Latest1 of 5 patches 0 repliesNew

1 of 5 patches is in this archive. The cover letter announces 5.

Patches in v2 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/5arm/dts: OMAP4: Update DTS file with new GIC bindings+0 -01 reply

Reviews trailers per patch

The patch has a Reviewed-by or Acked-by of their own; the series has one for all of them.

PatchRob Herring
SeriesA-b
1/5A-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v2 thread

Cover letter [PATCH v2 0/5] ARM: OMAP2+: Interrupt controllers adaptation to DT
Quoted 4 lines · Benoit

Hi Rob/Grant,

Gentle ping on that series too. This should the last one:-)

Sorry about that. For the series:

Acked-by Rob Herring <[email protected]>

Rob

Quoted 63 lines

Thanks,
Benoit

Quoted 54 lines · Benoit

Hi Rob,

Are you OK with that update?

Thanks,
Benoit

Quoted 45 lines · Benoit Cousson

Hi Tony and Rob,

Here is the series to take advantage of the new DT interrupt init mechanism.
Thanks to Marc's CONFIG_MULTI_IRQ_HANDLER series, OMAP4 just has to use the
default GIC binding and does not need some OMAP specific hacks anymore. OMAP2 and 3 are using a simple interrupt controller that can thus expose a simpler binding.

This update, compared to v1 [1], is introducing the IRQ domain for the OMAP2&3 INTC by default for both DT and none-DT build. Please note that in the near future that code can even be simplier with the
introduction of the domain support inside generic irq chip.

This series is based on lo/dt branch to get the needed cleanup and fixes for
OMAP.

The series is available here for reference:
git://gitorious.org/omap-pm/linux.git for_3.3/2_dt_irq

Regards,
Benoit

[1] http://www.spinics.net/lists/linux-omap/msg61152.html

Benoit Cousson (5):
arm/dts: OMAP4: Update DTS file with new GIC bindings
ARM: OMAP2/3: intc: Add irqdomain support
ARM: OMAP2/3: intc: Add DT support for TI interrupt controller arm/dts: OMAP3: Add interrupt-controller bindings for INTC
ARM: OMAP2+: board-generic: Use of_irq_init API

.../devicetree/bindings/arm/omap/intc.txt | 27 +++++++++++ arch/arm/boot/dts/omap3.dtsi | 6 ++- arch/arm/boot/dts/omap4.dtsi | 3 +- arch/arm/mach-omap2/board-generic.c | 30 +++++++------ arch/arm/mach-omap2/common.h | 10 ++++ arch/arm/mach-omap2/irq.c | 48 ++++++++++++++++++--

6 files changed, 103 insertions(+), 21 deletions(-)

create mode 100644 Documentation/devicetree/bindings/arm/omap/intc.txt

_______________________________________________
devicetree-discuss mailing list
devicetree-discuss at lists.ozlabs.org
https://lists.ozlabs.org/listinfo/devicetree-discuss

Read the cover letter in its thread