Add USB support to orion5x and edminiv2
Get series with b4
b4 am [email protected]Versions newest first
- v1 Latest0 of 4 patches 0 repliesNew
Patches in v1 No applies recorded yet
None of the 4 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.
Cover letter [U-Boot] [PATCH 0/4] Add USB support to orion5x and edminiv2
Hi Prafulla,
Le 16/01/2012 09:32, Prafulla Wadaskar a ?crit :
Quoted 46 lines
Quoted 46 lines
-----Original Message-----
From: Albert ARIBAUD [mailto:albert.u.boot at aribaud.net]
Sent: 16 January 2012 14:00
To: Prafulla Wadaskar
Cc: u-boot at lists.denx.de
Subject: Re: [U-Boot] [PATCH 0/4] Add USB support to orion5x and edminiv2Hi Prafulla,
Le 16/01/2012 09:20, Prafulla Wadaskar a ?crit :
Quoted 8 lines
Quoted 8 lines
-----Original Message-----
From: u-boot-bounces at lists.denx.de [mailto:u-boot- bounces at lists.denx.de] On Behalf Of Albert ARIBAUD
Sent: 16 January 2012 13:39
To: u-boot at lists.denx.de
Subject: [U-Boot] [PATCH 0/4] Add USB support to orion5x andedminiv2
Quoted 3 lines
Quoted 3 lines
This patch set adds USB support to the LaCie ED Mini V2 by renaming the 'kirkwood' USB driver a 'marvell' USB driver, sharing it
between
Quoted 3 lines
Quoted 3 lines
the orion5x SoC family and enabling it for the edminiv2 board.
(this is similar to what was done with the 'mvgbe' driver in
commits
Quoted 4 lines
Quoted 1 line
9b6bcdcbtoab9164d0)Hi Albert
This is patch series tested on both the platforms- Kirkwood, Orionfor this change?
Quoted 6 lines
Otherwise,
Acked-by Prafulla Wadaskar<[email protected]>Regards..
Prafulla . ..For kirkwood the code is just a bunch of renames with no functional impact, but I did test the patch set on kirkwood for build-time and run-time regressions while developing it.
Quoted 5 lines
Quoted 3 lines
However, since then I have rebased it a couple of times, and my openrd-client is currently not available for testing again. Could you possibly test it?
Okay I will do it in next week is that okay with you?
Don't bother: I've been lent another open-rd and I could run the u-boot image through openocd during lunch break. I've just tested usb start, usb tree with a mass storage USB key plugged in, usb info, usb part) and all works fine.
Quoted 2 lines
Regards..
Prafulla . .
Amicalement,
Signature · 1 line
Albert.