usb/mx6q: USB EHCI support for MX6Q boards
Get series with b4
b4 am [email protected]Versions newest first · linked by author and title
- v2 Latest0 of 2 patches 0 repliesNew
- v12 patches 0 repliesSuperseded
Patches in v2 No applies recorded yet
None of the 2 patches the cover letter announces are in this archive.
Reviews trailers per patch
| Patch | Dirk Behme |
|---|---|
| Series | A-b T-b |
Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.
Cover letter [U-Boot] [PATCH v2 0/2] usb/mx6q: USB EHCI support for MX6Q boards
Quoted 9 lines · Wolfgang Grandegger
v1 was bad, sorry. v2 fixes various issues reported by Dirk and Fabio. The patches are based on head of Stefano's "u-boot-imx" tree.
Wolfgang
Wolfgang Grandegger (2):
usb/ehci: Add USB support for the MX6Q
mx6qsabrelite: add and enable USB Host 1 support
Quoted 9 lines
arch/arm/cpu/armv7/mx6/clock.c | 13 ++ arch/arm/include/asm/arch-mx6/clock.h | 1 + arch/arm/include/asm/arch-mx6/imx-regs.h | 3 + board/freescale/mx6qsabrelite/mx6qsabrelite.c | 18 +++ drivers/usb/host/Makefile | 1 + drivers/usb/host/ehci-mx6.c | 205 +++++++++++++++++++++++++ include/configs/mx6qsabrelite.h | 13 ++ 7 files changed, 254 insertions(+), 0 deletions(-) create mode 100644 drivers/usb/host/ehci-mx6.c
Whole series:
Acked-by Dirk Behme <[email protected]>
Tested-by Dirk Behme <[email protected]>
on the SabreLite with an USB stick (USB storage) and some fatls commands to see if the content of the stick is visible.
Many thanks
Dirk