Skip to content

i.MX28: Fix ref_cpu clock setup

Albert ARIBAUD u-boot 2 versions – New

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v5 Latest posting 2/20 of 4 patches 0 repliesNew
  2. v5 posting 1/20 of 4 patches 0 repliesSuperseded

Patches in v5 posting 2/2 No applies recorded yet

None of the 4 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v5 yet.

Read the v5 thread

Cover letter [U-Boot] [PATCH 0/4 v5] i.MX28: Fix ref_cpu clock setup

Le 20/02/2012 08:40, Marek Vasut a ?crit :

Quoted 27 lines
Quoted 27 lines · Albert ARIBAUD
Quoted 25 lines

Hi Robert,

Le 15/02/2012 11:29, Robert at domain.unknown a ?crit :

Quoted 9 lines

From: Robert Delien<[email protected]>

This set of patches fixes ref_cpu clock setup.

Robert Delien (4):
Renamed mx28_register to mx28_register_32 to prepare for

mx28_register_8

Quoted 8 lines

Introducing 8-bit wide register, mx28_register_8
Fix erroneous 32-bit access to hw_clkctrl_frac0 and hw_clkctrl_frac1

registers

Preventing needless switching on and off PLL bypass mode, allowing

allow single-stepping through the SPL

P
I don't see this V5 on patchwork. Please a V6 with up-to-date Tested-By / Acked-By etc -- and of course make sure the e-mail address stays correct.

Quoted 10 lines
Quoted 3 lines
Quoted 1 line

Besides, this touches i.MX, so I think Stefano should be at least Cc:

Right - Robert, I miss also which is the state of the current patches - is there still an issue that avoid boards to boot ?

Yea ... that issue is fixed. I acked patches 1,2,3 ... I'm still unsure about patch 4.

M

Quoted 2 lines

Stefano

I had an offline e-mail exchange with Robert, the conclusion of which is that he will not follow up on the patch series and we should cancel it.

Amicalement,

Signature · 1 line
Albert.

Read the cover letter in its thread