Skip to content

i.MX28: Fix ref_cpu clock setup

Stefano Babic u-boot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v5 Latest0 of 4 patches 0 repliesNew

Patches in v5 No applies recorded yet

None of the 4 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v5 yet.

Read the v5 thread

Cover letter [U-Boot] [PATCH 0/4 v5] i.MX28: Fix ref_cpu clock setup
Quoted 15 lines · Albert ARIBAUD

Hi Robert,

Le 15/02/2012 11:29, Robert at domain.unknown a ?crit :

Quoted 4 lines

From: Robert Delien<[email protected]>

This set of patches fixes ref_cpu clock setup.

Quoted 8 lines

Robert Delien (4):
Renamed mx28_register to mx28_register_32 to prepare for

     mx28_register_8

Introducing 8-bit wide register, mx28_register_8
Fix erroneous 32-bit access to hw_clkctrl_frac0 and hw_clkctrl_frac1
registers
Preventing needless switching on and off PLL bypass mode, allowing
allow single-stepping through the SPL

Quoted 5 lines

P
I don't see this V5 on patchwork. Please a V6 with up-to-date Tested-By / Acked-By etc -- and of course make sure the e-mail address stays correct.

Besides, this touches i.MX, so I think Stefano should be at least Cc:

Right - Robert, I miss also which is the state of the current patches - is there still an issue that avoid boards to boot ?

Stefano

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================

Read the cover letter in its thread