RFC Move OMAP2+ over to use COMMON clock

Hi,

This RFC series is based of Mikes' latest clk-next. I will rebase it once 3.5-rc1 is out and post with more testing thats in progress. Meanwhile, the RFC is for me to get some early feedback on the patches.

This series retains the static clock declarations and also all data and code in mach-omap folders and does not move it as yet to drivers/clk. I know its desierable that we move away from static declaration of data and move over to drivers/clk but thats not addressed by this series.
Also the series moves over only OMAP2+ (OMAP2/3/4)
to use COMMON clk and leaves OMAP1 still using OMAP clock framework.

The series does not break git-bisect at any point and to do so adds new data in completely different files and uses some ifdefferry in code too, and switches over in one patch to move from OMAP clock to COMMON clock. Then deletes all old data files and all the ifdeferrey around.

All of the new data for OMAP2/3/4 in the new COMMON clock format is autogenerated, OMAP4 by hacking the existing python scripts, and OMAP2/3 by converting the existing C99 structs to JSON format (Thanks to Paul Walmsley for this) and then having python to read the JSON format and generate the C99 structs back in the form COMMON clk expects.

The patches also depend on 2 of my patches posted here
http://comments.gmane.org/gmane.linux.kernel/1298747
I have not reposted them becasue one of them is already picked up by Mike, and the other is already under discussion.

The series with all dependent patches can be found here
git://github.com/rrnayak/linux.git clk-next-omap

regards,
Rajendra

Mike Turquette (1):
ARM: omap4: cm: add bitfield width values

Rajendra Nayak (23):
clk: Add CLK_IS_BASIC flag to identify basic clocks
ARM: omap: clk: convert all clk_enable to clk_prepare_enable
ARM: omap: hwmod: get rid of all omap_clk_get_by_name usage
ARM: omap: clk: Nuke plat clock.c & clock.h if CONFIG_COMMON_CLK
ARM: omap: clk: Remove all direct dereferncing of struct clk
ARM: omap: hwmod: Fix up hwmod based clkdm accesses
ARM: omap4: clk: Convert to common clk
ARM: omap3: clk: Convert to common clk

ARM: omap2: clk: Convert to common clk
ARM: omap: clk: list all clk_hw_omap clks to enable/disable autoidle
ARM: omap: clk: Define a function to enable clocks at init
ARM: omap4: clk: Add 44xx data using common struct clk
ARM: omap3: clk: Add 3xxx data using common struct clk
ARM: omap2: clk: Add 24xx data using common struct clk
ARM: omap: clk: Switch to COMMON clk
ARM: omap: clk: Use plat clock.c & clock.h only for OMAP1