ice: Use ice_ena_vsi and ice_dis_vsi in DCB configuration flow
Bowers intel-wired-lan 2 versions – New
Get series with b4
Patches in v3 No applies recorded yet
Reviews trailers per patch
None of the 15 patches has a Reviewed-by or Acked-by.
| Patch | Andrew Bowers |
| 1/15ice: Use ice_ena_vsi and ice_dis_vsi in DCB configuration flow | T-b |
| 2/15ice: Add NDO callback to set the maximum per-queue bitrate | T-b |
| 3/15ice: Implement DCBNL support | T-b |
| 4/15ice: avoid setting features during reset | T-b |
| 5/15ice: Fix to change Rx/Tx ring descriptor size via ethtool with DCBx | T-b |
| 6/15ice: configure software LLDP in ice_init_pf_dcb | T-b |
| 7/15ice: Check if VF is disabled for Opcode and other operations | T-b |
| 8/15ice: Change max MSI-x vector_id check in cfg_irq_map | T-b |
| 9/15ice: use pkg_dwnld_status instead of sq_last_status | T-b |
| 10/15ice: delay less | T-b |
| 11/15ice: Update enum ice_flg64_bits to current specification | T-b |
| 12/15ice: remove unnecessary conditional check | T-b |
| 13/15ice: Introduce and use ice_vsi_type_str | T-b |
| 14/15ice: use more accurate ICE_DBG mask types | T-b |
| 15/15ice: print opcode when printing controlq errors | T-b |
Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.
Read the v3 thread →