Skip to content

Enable at91sam9x5 boot from serial flash

Bo Shen u-boot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest0 of 3 patches 0 repliesNew

Patches in v1 No applies recorded yet

None of the 3 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [U-Boot] [PATCH 0/3] Enable at91sam9x5 boot from serial flash

Hi Andreas,

Quoted 7 lines · Bo Shen

This series patches enable at91sam9x5 boot from serial flash

Bo Shen (3):
spi: add atmel at25db321 serial flash support
arm : at91sam9x5 : enable serial flash boot
arm : at91sam9x5 : make nand available when not boot from nand

Please don't take this serial patches.
I found the spi only works at 1MHz speed which is too slow. I will resend it let it work at a higher speed.

BRs,
Bo Shen

Quoted 7 lines
  arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c |    4 ++--
  board/atmel/at91sam9x5ek/at91sam9x5ek.c          |    2 ++
  boards.cfg                                       |    1 +
  drivers/mtd/spi/atmel.c                          |   10 ++++++++++
  include/configs/at91sam9x5ek.h                   |   18 ++++++++++++++----
  5 files changed, 29 insertions(+), 6 deletions(-)

Read the cover letter in its thread