Skip to content

Tegra 2 USB ULPI series

Igor Grinberg u-boot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest3 patches 0 repliesNew

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
3/3tegra20: add USB ULPI init code+0 -02 replies
3/3tegra20: add USB ULPI init code+0 -00 replies
3/3tegra20: add USB ULPI init code+0 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [U-Boot] [PATCH 0/3] Tegra 2 USB ULPI series
Quoted 6 lines · Lucas Stach

With this series we are able to initialize USB controllers using an external ULPI phy AKA USB2 on Tegra 2 devices.

This was tested to work on a Toradex Colibri T20 board, where USB2 is used to access the ASIX ethernet chipset. Testing was done with "tegra20: usb: rework set_host_mode"

I'm sorry, I have missed this patch.
Can you please give us a reference to it?

Quoted 17 lines

applied. I did not spot any regressions on the UTMI ports.

Patchset is based on top of u-boot-tegra/next

Lucas Stach (3):
tegra20: complete periph_id enum
tegra20: add clock_set_pllout function
tegra20: add USB ULPI init code

 arch/arm/cpu/armv7/tegra20/usb.c            | 131 +++++++++++++++++++++++++---
 arch/arm/cpu/tegra20-common/clock.c         |  26 ++++++
 arch/arm/cpu/tegra20-common/warmboot_avp.c  |   2 +-
 arch/arm/include/asm/arch-tegra20/clk_rst.h |  11 ++-
 arch/arm/include/asm/arch-tegra20/clock.h   |  25 ++++++
 arch/arm/include/asm/arch-tegra20/usb.h     |  29 ++++--

6 Dateien ge?ndert, 206 Zeilen hinzugef?gt(+), 18 Zeilen entfernt(-)

Signature · 2 lines
Regards,
Igor.