Skip to content

Tegra 2 USB ULPI series

Stephen Warren u-boot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest3 patches 0 repliesNew

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/3tegra20: complete periph_id enum+0 -00 replies
2/3tegra20: add clock_set_pllout function+0 -00 replies
3/3tegra20: add USB ULPI init code+0 -00 replies
3/3tegra20: add USB ULPI init code+0 -01 reply

Reviews trailers per patch

1 of 4 patches has a Reviewed-by or Acked-by.

PatchStephen Warren
1/3A-b
2/3
3/3
3/3

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [U-Boot] [PATCH 0/3] Tegra 2 USB ULPI series
Quoted 9 lines · Lucas Stach

With this series we are able to initialize USB controllers using an external ULPI phy AKA USB2 on Tegra 2 devices.

This was tested to work on a Toradex Colibri T20 board, where USB2 is used to access the ASIX ethernet chipset. Testing was done with "tegra20: usb: rework set_host_mode" applied. I did not spot any regressions on the UTMI ports.

Patchset is based on top of u-boot-tegra/next

Hmmm. I tried testing this on my local branch on Harmony, which has all the patches necessary for multiple USB ports to work, and indeed they do on Seaboard. However, this series (plus some Harmony-specific config and .dts changes) didn't cause the ULPI port to work:-( Any idea why?