GPMC driver conversion
Get series with b4
b4 am [email protected]Versions newest first
- v8 Latest0 of 3 patches 0 repliesNew
Patches in v8 No applies recorded yet
None of the 3 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v8 yet.
Cover letter [PATCH v8 0/3] GPMC driver conversion
Hello,
Le 08/09/2012 00:10, Tony Lindgren a ?crit :
Quoted 27 lines · Afzal Mohammed
Quoted 16 lines
Hi,
Basic gpmc driver conversion series. Driver that is now created out of gpmc code is a simple one, it handles tasks that were earlier executed by
gpmc_init. Now instead of relying on cpu_is_* checks, it obtains resources and clk handle in the standard Linux way. The existing gpmc interface works as was without this series.HWMOD patch also has been brought into this series back with v7 series
As this creates only a basic driver, further gpmc driver work can be based over this, while having a driver first in place.
This series is based on l-o/testing-cleanup as on 5-Sep-12, i.e. over commit,
Quoted 6 lines
e3a5c14 ARM: OMAP1: Move SoC specific headers from plat to mach for omap1
per Tony's suggestion.
It is available @git://gitorious.org/x0148406-public/linux-kernel.git gpmc-drv-v8
Great, this all looks good to me. I suggest that on top of this we add minimal devicetree binding that does not even attempt to deal with the timings yet.
Quoted 7 lines
Then once the minimal devicetree binding is in place, we can call the current GPMC timing functions using the compatible flags and auxdata in the
gpmc.cdriver.That way we get all the legacy boards booting with GPMC support for smsc911x etc, and can even remove some less used board-*.c files.
This would be great. If you happen to have DT bindings for GPMC, I would be happy to test them with my Overo board, as well as with my CAN chips on a custom board.
Regards,
Florian