Skip to content

i2c for R-mobile

Heiko Schocher u-boot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v3 Latest0 of 10 patches 0 repliesNew

Patches in v3 No applies recorded yet

None of the 10 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v3 yet.

Read the v3 thread

Cover letter [U-Boot] [PATCH v3 00/10] i2c for R-mobile

Hello Tetsuyuki Kobayashi,

Quoted 22 lines · Tetsuyuki Kobayashi

Iwamatu-san, thank you for review. This is v3 patch for sh_i2c.
Changes for v3:
- call i2c_finish before returning i2c_probe, i2c_read, i2c_write even if error occured. Without this, it fails to boot Linux kernel after using "i2c probe" command.
- use setbits/clrbits macro as Iwamatsu-san pointed.

Please check patch 5,6 and 10. The rest is not changed.

This patch set is based on arm/rmobile branch of u-boot-sh.git.

Tetsuyuki Kobayashi (10):
i2c: sh_i2c.c: support iccl and icch extension
i2c: sh_i2c.c: correct BUSY bit define in ICSR
i2c: sh_i2c.c: adjust for SH73A0
i2c: sh_i2c.c: support I2C2, I2C3 and I2C4
i2c: sh_i2c: enable i2c_probe
i2c: sh_i2c.c: check error in i2c_read and i2c_write
i2c: sh_i2c.c: remove unused function
arm: rmobile: kzm9g: enable I2C1
arm: rmobile: kzm9g: enable I2C2
i2c: sh_i2c: use setbits/clrbits macro

Quoted 4 lines
  board/kmc/kzm9g/kzm9g.c |    7 ++-
  drivers/i2c/sh_i2c.c    |  139 ++++++++++++++++++++++++++++++++---------------
  include/configs/kzm9g.h |    8 ++-
  3 files changed, 107 insertions(+), 47 deletions(-)

Applied this patchset (exept patch "i2c: sh_i2c.c: remove unused function", as this patch is already in mainline) to u-boot-i2c master

Thanks!

bye,
Heiko

Signature · 2 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

Read the cover letter in its thread