ARM: OMAP: second set of PRM/CM/CGRM cleanup patches for 3.8
Get series with b4
b4 am [email protected]Versions newest first
- v1 Latest0 of 7 patches 0 repliesNew
Patches in v1 No applies recorded yet
None of the 7 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.
Cover letter [PATCH 0/7] ARM: OMAP: second set of PRM/CM/CGRM cleanup patches for 3.8
Hi Paul,
What is CGRM? Is it a typo?
Regards,
Benoit
Quoted 70 lines · Paul Walmsley
This series removes the
omap_prcm_get_reset_sources()function. This was exported fromarch/arm/mach-omap2/prcm.cfor use by the OMAP watchdog driver to report the "boot reason". This series reimplements this using aplatform_datafunction pointer for the time being, but after the upcoming PRM/CM drivers are merged, the watchdog driver can be patched to use an exported function from the drivers.This series will also be used as a base for other PRM/CM cleanup during the 3.8 time frame, since it adds the
prm_register()andprm_unregister()functions. These are called by SoC-specific PRM IP block drivers to register function pointers with the PRM subsystem.This series changes the format of the watchdog's boot reason data to conform with the watchdog subsystem standard (the WDIOF_* flags). If users need more detail than that interface provides, either the watchdog interface can be patched, or those users can get that information from the upcoming PRM drivers.
- Paul
---
prcm_cleanup_b_3.8
text data bss dec hex filename
7519295 696796 5613996 13830087 d307c7 vmlinux.omap2plus_defconfig.orig
7520203 696868 5613996 13831067 d30b9b vmlinux.omap2plus_defconfigPaul Walmsley (7):
ARM: OMAP2+: PRM: prepare for use ofprm_ll_datafunction pointers
ARM: OMAP2+: CM: prepare for use ofcm_ll_datafunction pointers
ARM: OMAP1: createread_reset_sources()function (for initial use by watchdog)
ARM: OMAP2+: PRM: create PRM reset source API for the watchdog timer driver
ARM: OMAP2+: WDT: move init; addread_reset_sourcespdata function pointer
watchdog: OMAP: use standard GETBOOTSTATUS interface; useplatform_datafn ptr
ARM: OMAP2+: PRCM: removeomap_prcm_get_reset_sources()arch/arm/mach-omap1/common.h | 2 + arch/arm/mach-omap1/devices.c | 21 ++++++- arch/arm/mach-omap1/reset.c | 39 +++++++++++++ arch/arm/mach-omap2/Makefile | 2 - arch/arm/mach-omap2/cm.h | 12 ++++ arch/arm/mach-omap2/cm_common.c | 71 +++++++++++++++++++++++ arch/arm/mach-omap2/devices.c | 26 -------- arch/arm/mach-omap2/prcm.c | 12 ---- arch/arm/mach-omap2/prm-regbits-24xx.h | 4 + arch/arm/mach-omap2/prm-regbits-34xx.h | 10 +++ arch/arm/mach-omap2/prm.h | 53 +++++++++++++++++ arch/arm/mach-omap2/prm2xxx.c | 68 ++++++++++++++++++++++ arch/arm/mach-omap2/prm2xxx.h | 4 + arch/arm/mach-omap2/prm2xxx_3xxx.h | 2 + arch/arm/mach-omap2/prm3xxx.c | 65 +++++++++++++++++++++ arch/arm/mach-omap2/prm3xxx.h | 2 + arch/arm/mach-omap2/prm44xx.c | 83 ++++++++++++++++++++++++++- arch/arm/mach-omap2/prm44xx.h | 2 + arch/arm/mach-omap2/prm_common.c | 78 +++++++++++++++++++++++++ arch/arm/mach-omap2/wd_timer.c | 33 +++++++++++ arch/arm/plat-omap/include/plat/prcm.h | 1 drivers/watchdog/omap_wdt.c | 26 ++++---- include/linux/platform_data/omap-wd-timer.h | 38 ++++++++++++ 23 files changed, 594 insertions(+), 60 deletions(-) create mode 100644 arch/arm/mach-omap2/cm_common.c create mode 100644 include/linux/platform_data/omap-wd-timer.h--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html